恒捷供应链
LUTRON
LUTRON
路昌电子企业股份有限公司成立于1976年，40多年来一直是台湾领先的测试测量仪器制造商。
产品分类
SKUS:361 截止时间:2026/03/26
1
13
描述： EcoSystem® cableFeaturesInternal conductors match EcoSystem® device terminal and lead color schemeEach conductor sized for direct connection to EcoSystem ballast and module terminalsThree types of EcoSystem digital link cable: nonplenum cable (CL3R) for Class 2 applications, non-plenum cable (TC) for Class 1 applications and plenum cable for plenum Class 2 applicationsTwo types of EcoSystem Class 2 sensor cable: plenum sensor cable (CL2P), non-plenum sensor cable (CL2R)Available in 1000 ft (305 m) +/- 10% spoolPlenum ratedRated to a maximum of 300 VNon-plenum ratedDual rated to a maximum of 300 V or 600 V dependant upon application
描述： 5-conductor cableFeaturesAvailable in 250 ft (75 m) or 500 ft (150 m) spoolsSix conductors:Common—#12 AWG (4.0 mm2)Power—#12 AWG (4.0 mm2)MUX data—#22 AWG (0.25 mm2)MUX data—#22 AWG (0.25 mm2)Sense line—#18 AWG (0.75 mm2)Drain wire—#24 AWG (0.2 mm2)300 V ratedUL/CSA listedCapacitance of 22 AWG (0.25 mm2) twisted wire pair:- conductor to shield: 48 pf/ft max- conductor to conductor: 25 pf/ft maxPlenum ratedPlenum rated for use in ceilings and enclosures that are also used by the building air distribution system to transport environmental airListed as cable type CL3P or CMPTotal outer jacket diameter: 0.17 in (4.37 mm)Plenum sheath, 75 °C ratedRated FT6Non-plenum ratedListed as cable type CL3R or CMGTotal outer jacket diameter: 0.325 in (8.25 mm)PVC sheath, 75 °C ratedRated FT4
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： Features• Continuous, flicker-free dimming from 100% to 1% or less for T8, and 1% for T5 and T5HO lamps.• Compatible with Energi Savr Node with EcoSystem unit, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem unit, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• 100% performance tested and burned in at factory.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life.• Non-volatile memory restores all ballast settings after power failure.• 100% compatible with all EcoSystem digital controls.• Custom ballast factors available for UL or CSA listed products. Design tool and specifications can be found at www.lutron.com/ballasttool• Buy American Act (BAA) models available. See Model List for specific availability.• RoHS compliant.• NOM certified models available. See Model List for specific availability.• Models available for markets outside North America.— See International EcoSystem H-Series spec sheet.
描述： Features• Continuous, flicker-free dimming from 100% to 10%• Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor, and one personal control input (infrared receiver or wallstation)• Communicates status and sensor inputs over the EcoSystem digital link• Programmed rapid start design ensures full rated lamp life while dimming and cycling• Lamps turn on to any dimmed level without flashing to full brightness• Low harmonic distortion throughout the entire dimming range• Frequency of operation ensures that ballast does not interfere with infrared devices• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life• Ultra-quiet operation• Non-volatile memory restores all ballast settings after power failure• Ballasts maintain consistent light output for linear lamp lengths (e.g., 4 ft [1.5 m], 3 ft [1 m], 2 ft [0.5 m] have same relative output)• Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground• 100% performance tested at factory• Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool• BAA-compliant (Buy American Act) model numbers available. Add a "U" prefix to the model number
描述： Features• Continuous, flicker-free dimming from 100% to 10%• Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor, and one personal control input (infrared receiver or wallstation)• Communicates status and sensor inputs over the EcoSystem digital link• Programmed rapid start design ensures full rated lamp life while dimming and cycling• Lamps turn on to any dimmed level without flashing to full brightness• Low harmonic distortion throughout the entire dimming range• Frequency of operation ensures that ballast does not interfere with infrared devices• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life• Ultra-quiet operation• Non-volatile memory restores all ballast settings after power failure• Ballasts maintain consistent light output for linear lamp lengths (e.g., 4 ft [1.5 m], 3 ft [1 m], 2 ft [0.5 m] have same relative output)• Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground• 100% performance tested at factory• Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool• BAA-compliant (Buy American Act) model numbers available. Add a "U" prefix to the model number
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： EcoSystem® cableFeaturesInternal conductors match EcoSystem® device terminal and lead color schemeEach conductor sized for direct connection to EcoSystem ballast and module terminalsThree types of EcoSystem digital link cable: nonplenum cable (CL3R) for Class 2 applications, non-plenum cable (TC) for Class 1 applications and plenum cable for plenum Class 2 applicationsTwo types of EcoSystem Class 2 sensor cable: plenum sensor cable (CL2P), non-plenum sensor cable (CL2R)Available in 1000 ft (305 m) +/- 10% spoolPlenum ratedRated to a maximum of 300 VNon-plenum ratedDual rated to a maximum of 300 V or 600 V dependant upon application
描述： Features• Continuous, flicker-free dimming from 100% to 10%• Integral sensor connection provides power for and responds to one occupancy sensor, one photo sensor, and one personal control input (infrared receiver or wallstation)• Communicates status and sensor inputs over the EcoSystem digital link• Programmed rapid start design ensures full rated lamp life while dimming and cycling• Lamps turn on to any dimmed level without flashing to full brightness• Low harmonic distortion throughout the entire dimming range• Frequency of operation ensures that ballast does not interfere with infrared devices• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life• Ultra-quiet operation• Non-volatile memory restores all ballast settings after power failure• Ballasts maintain consistent light output for linear lamp lengths (e.g., 4 ft [1.5 m], 3 ft [1 m], 2 ft [0.5 m] have same relative output)• Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground• 100% performance tested at factory• Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool• BAA-compliant (Buy American Act) model numbers available. Add a "U" prefix to the model number
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： Features• Continuous, flicker-free dimming from 100% to 1% or less for T8, and 1% for T5 and T5HO lamps.• Compatible with Energi Savr Node with EcoSystem unit, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem unit, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• 100% performance tested and burned in at factory.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life.• Non-volatile memory restores all ballast settings after power failure.• 100% compatible with all EcoSystem digital controls.• Custom ballast factors available for UL or CSA listed products. Design tool and specifications can be found at www.lutron.com/ballasttool• Buy American Act (BAA) models available. See Model List for specific availability.• RoHS compliant.• NOM certified models available. See Model List for specific availability.• Models available for markets outside North America.— See International EcoSystem H-Series spec sheet.
描述： CORD WHITE PLUG-IN APPLIANCE MOD
描述： Features• Continuous, flicker-free dimming from 100% to 1% or less for T8, and 1% for T5 and T5HO lamps.• Compatible with Energi Savr Node with EcoSystem unit, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem unit, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• 100% performance tested and burned in at factory.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life.• Non-volatile memory restores all ballast settings after power failure.• 100% compatible with all EcoSystem digital controls.• Custom ballast factors available for UL or CSA listed products. Design tool and specifications can be found at www.lutron.com/ballasttool• Buy American Act (BAA) models available. See Model List for specific availability.• RoHS compliant.• NOM certified models available. See Model List for specific availability.• Models available for markets outside North America.— See International EcoSystem H-Series spec sheet.
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： Features• Continuous, flicker-free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube.• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls for consistent fixture-to-fixture dimming performance.• Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem connection, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid-start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• 100% performance-tested and burned-in at factory.• Non-volatile memory restores all ballast settings after power failure.• Buy American Act (BAA) models available; see Model List for specific availability.• RoHS compliant.• NOM certified models available; see Model List for specific availability.• Custom ballast factors available for UL® or CSA-listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.
描述： Features• Continuous, flicker-free dimming from 100% to 1% or less for T8, and 1% for T5 and T5HO lamps.• Compatible with Energi Savr Node with EcoSystem unit, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem unit, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.• Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.• 100% performance tested and burned in at factory.• Lamps turn on to any dimmed level without going to full brightness.• Low harmonic distortion throughout the entire dimming range maintains power quality.• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.• Ultra-quiet operation.• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life.• Non-volatile memory restores all ballast settings after power failure.• 100% compatible with all EcoSystem digital controls.• Custom ballast factors available for UL or CSA listed products. Design tool and specifications can be found at www.lutron.com/ballasttool• Buy American Act (BAA) models available. See Model List for specific availability.• RoHS compliant.• NOM certified models available. See Model List for specific availability.• Models available for markets outside North America.— See International EcoSystem H-Series spec sheet.
