恒捷供应链
GECKODRIVE
GECKODRIVE
自 1999 年以来，Geckodrive, Inc. 一直在制造高质量的原始电机控制设计。它的驱动器专为步进和伺服应用而设计，并且不断开发新的电机控制技术。 Geckodrive 产品用于各行各业的高规格和关键任务应用。 它是值得信赖的电机控制供应商，因为它具有极高的质量标准、可访问的技术支持、慷慨的保修、较短的交货时间和快速的周转运输。
产品分类
SKUS:16 截止时间:2026/03/26
1
1
G540 FOUR AXIS STEP MOTOR CONTROL
描述： 50VDC 3.5A 4-AXIS STP MTR CTRL
描述： 80VDC 7A LOW RES STP MTR CTRL
描述： 50VDC 3.5A 10USTEP STP MTR CTRL
GR214V HIGH RESOLUTION STEP MOTOR CONTROL
描述： 80VDC 7A HIGH RES STP MTR CTRL
描述： The G203V is a Stepper Motor Drive uses a synchronous PWM design that is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage. The G203V is a jumper-free drive. There are no internal user settings at all so there is no need to ever remove the drive cover at all. It uses a 2-piece modular main connector. The connector is split in two pieces, terminals 1 through 6 (power supply and motor leads) and terminals 7 through 12 (control interface). Each can be removed separately by pulling the connector body upwards and off of the mating header pins on the G203V. The connectors must initially be removed to mount the G203V to a heat sink or chassis. . 200ns Before step pulse rising edge direction setup . 200ns Hold after step pulse rising edge direction setup
描述： DRIVER-STEP MOTOR 2X15-FEMALE 3.5A 50VDC
描述： 50VDC 3.5A 10USTEP STP MTR CTRL
描述： 80VDC 7A 10USTEP STP MTR CTRL
描述： Heatsink and Screw Combo
G320X DC BRUSH SERVO MOTOR CONTROL
描述： 80VDC 20A PID SERVO MTR CTRL
描述： 8100-033A In Stock, PLCC
