AVONWOOD

EUR111K4909

EUR211K4910

描述： EUR211K4910 is a Eureka 13.56MHz RFID reader module version starter kit. The starter kit includes a close proximity pcb reader module for reading and writing to HF passive tags. The reader module is ideal for OEM applications, pilots and trials. The reader supports ISO-15693 tags with typical read ranges of between 2 to 5cm with integral antenna. The reader can write to ISO-15693 tags with the write range being typically one third of available read range. A selection of supported HF RFID tags are included in the kit. . Hardware selectable TTL, RS232 and RS485 (2 wire) communication interface . Software configurable communication parameters including the protocol and operating modes . Firmware updates are possible via a supplied bootloader . Evaluation software allows full control of the reader commands and configuration . Reader operates using the supplied 12V DC PSU and consumes <250mA while operating . Open drain output allows the option to control an external device such as a sounder or led

EUR111K4907

描述： EUR111K4907 is a Eureka 125KHz RFID reader module version starter kit. This kit provides an ideal low cost introduction into low frequency (LF) RFID. The starter kit includes a close proximity pcb reader module for reading and writing to LF passive tags. The reader module is ideal for OEM applications, pilots and trials. The reader supports Unique read only (R/O) and Hitag-S read write (R/W) tags with typical read ranges of between 2 to 5cm using the supplied integral antenna. The reader can write to all hitag-s variants of R/W tags with the write range being typically one third of available read range. A selection of supported LF tags are included in the kit, which include both read only and read write options. For specific applications different antenna can be supplied to offer greater read range and positioning flexibility. . Hardware selectable TTL, RS232 and RS485 (2 wire) communication interface . Software configurable communication parameters including the protocol and operating modes . Firmware updates are possible via a supplied bootloader . Evaluation software allows full control of the reader commands and configuration. . Reader operates using the supplied 12V DC PSU and consumes <100mA while operating . Open drain output allows the option to control an external device such as a sounder or led

EURUHFT4928

描述： EURUHFT4928 is an UHF 868MHz large metal mount tag. This is a durable EPC Class1 Gen2 UHF on metal tag developed for challenging industrial asset management and logistics application with certified performance. The tag is fully encapsulated and designed to fit onto metallic surfaces either mechanically or with industrial adhesive. . Operating frequency of 865-965MHz . Read range 6-7 meters 20-23 feet . EPC memory 240 bit + 512 bit extended memory . EPC class 1 gen 2 compliant communication protocol . It uses NXP G2XM IC

EUR211K4912

描述： EUR211K4912 is a Eureka 13.56MHz RFID USB desktop reader version starter kit. The starter kit includes a close proximity USB desktop reader for reading and writing to HF passive tags. For easy installation and convenience the reader is housed in a sloped ABS enclosure with powered USB communication on the rear panel. Ideal for a variety of desktop applications. The reader supports ISO-15693 tags with typical read ranges of between 2 to 5cm with internal antenna. The reader can write to ISO-15693 with the write range being typically one third of available read range. A selection of supported HF RFID tags are included in the kit. . USB desktop reader has software configurable communication parameter . Firmware updates are possible via a supplied bootloader . Software allows full control of the reader commands and configuration

EURIDT4936

描述： EURIDT4936 is an transmit only personnel tag. The active tag is designed to be worn using a lanyard, necklace or clipped to clothing for personnel application or can be fixed to assets using a permanent adhesive. With a footprint of a standard credit card, the Eureka-iD personnel tag/secure card is housed in a lightweight ultrasonically sealed ABS plastic enclosure to provide protection from adverse environmental conditions. The active tag is powered by an internal battery. Operating modes include transmit only at preset intervals and wakeup/transmit. The Eureka-iD personnel tag/secure card has a unique tag identification number and built-in anti-collision allowing multiple tags to be identified simultaneously. The Eureka-iD personnel tag or secure card is a hands free long range active RFID tag generally used for personnel and asset identification, application in industry, commerce and the service sector. . 868MHz of transmit frequency . FSK modulation . 125kHz wakeup frequency with OOK modulation . Sensitivity of 1mV RMS . ERP is lesser than 2uW . Data rate of 19,200 baud . Operates up to 100m range . Material is cased with ultrasonically sealed or resin potted (ABS) . Powered by internal lithium coin cell

EURIDK4916

描述： EURIDK4916 is a Eureka UHF active RFID transmit only version starter kit. The Eureka UHF Active Tag Reader is a self contained receiver unit with an 868MHz PCB dipole antenna that detects and decodes Eureka-iD tags. The reader unit can detect transmitting Eureka-iD tags up to 100metres away in free air but will vary dependant on environment and factors that effect RF. The Eureka UHF active RFID starter kit offers a cost effective long range tagging system for a wide variety of applications. . Reader unit communicates via TCP/IP over a standard LAN connection . Unit has a 12V DC power supply . Reader configuration can be setup through software and firmware control . 10/100base-T ethernet via RJ45

EURIDT4935

描述： EURIDT4935 is an transmit only asset tag. A hands free, long-range active RFID tag generally used for asset and vehicle identification, tracking and security application in industry, commerce and the service sector. The Eureka-iD active asset tag is ultrasonically sealed into a toughened ABS case, which provides protection from adverse environmental conditions and has the option to be It is housed in a rugged shock resistant casing providing ultimate protection in harsh environments. Depending on the application the active tag can be fixed to an asset or vehicle using a permanent adhesive or bolted using the optional tough rubber housing. The active tag is powered by an internal battery. Operating modes include transmitting only at preset intervals or wakeup/transmit. The Eureka-iD Active Asset Tag has built-in anti-collision allowing multiple tags to be identified simultaneously. . 868MHz RF frequency . FSK modulation . ERP is lesser than 2uW . Data rate of 19,200 baud . Operates up to 100m range . Material is cased with ultrasonically sealed or resin potted (ABS) . Powered by internal lithium coin cell

EURIDK4917

描述： EURIDK4917 is a Eureka UHF active RFID wakeup version starter kit. This kit provides an ideal low cost introduction into ultra high frequency (UHF) active RFID. The Eureka UHF Active Tag Reader is a self contained receiver unit with an 868MHz PCB dipole antenna that detects and decodes Eureka-iD tags. The reader unit can detect transmitting Eureka tags up to 100metres away in free air but will vary depending on environment and factors that effect RF. The wakeup unit is a stand alone unit used to activate the Eureka tags to enable them to send their data to the reader. The unit with an integral antenna produces a controllable RF field that activates the tag when it enters the field. Typically this can provide up to 5m range. The Eureka UHF active RFID starter kit offers a cost effective long range tagging system for a wide variety of applications. . Reader unit communicates via TCP/IP over a standard LAN connection . Unit has a 12V DC power supply . Reader configuration can be setup through software and firmware control . 10/100base-T ethernet via RJ45

EUR211K4912

描述： RFID START KIT

EURIDK4916

描述： UHF ACTIVE RFID START KIT