AMEC THERMASOL
AMEC THERMASOL
AMEC Thermasol销售各种热管理材料。AMEC THERMASOL的产品包括导热垫/绝缘体和间隙填充物,导热胶带,相变界面材料和石墨箔。
产品分类
SKUS:138 截止时间:2026/03/26
1
5
描述: 热绝缘,相变材料,蜡,4W/m.K,0.25mm
描述: 热管,热管,超平,扁平,300W,铝,100mm,50mm,2.5mm
描述: 热管,热管,超平,扁平,170W,铝,150mm,40mm,2mm
描述: THERM TAPE 305MMX305MM W/ADH WHT,Thermal Pad White 305.00mm x 305.00mm Square Adhesive - Both Sides
描述: THERM TAPE 305MMX305MM W/ADH WHT,Thermal Pad White 305.00mm x 305.00mm Square Adhesive - Both Sides
描述: THERMAL PAD 200MMX200MM GRAY,Thermal Pad Gray 200.00mm x 200.00mm Square
描述: THERM PAD BLUE,Thermal Pad Blue Tacky - Both Sides
描述: Carbon Fibre Thermal Filler Pad,Thermal Pad Black 150.00mm x 50.00mm Rectangular
描述: THERMAL PAD 200MMX200MM BLUE,Thermal Pad Blue 200.00mm x 200.00mm Square
描述: FLAT ALUMINIUM HEAT PIPE 1.6X30X
描述: 热管,热管,超平,扁平,300W,铝,200mm,50mm,2.5mm
描述: The MHP-2040A-250A is an ultra flat Heat Pipe to eliminate the need for a fan and heat sink, with the additional benefits of reducing power consumption, noise output and product thickness. It can directly remove heat from the source and be transferred direct to the chassis or to an external heat sink. It also negates the requirement for ventilation holes and thereby reduces ingress of dust (no air filters required) and static. . 40 to 170W Maximum heat transfer rate
描述: The MHP-1220A-100A is a 1.2mm ultra Flat Heat Pipe with micro technology. It may be possible to eliminate the need for a costly fan and heat sink, with the additional benefits of reducing power consumption, noise output, product thickness and cost. The flat heat pipes can directly remove heat from the source and be transferred direct to the chassis or to an external heat sink. It has high performance, excellent heat transmitter and also heat dissipation through its flat area. . Micro Technology Applied . Acetone Working Fluid . 5 to 8W Maximum Heat Transfer Rate . Ultra Slim and Flat Heat Pipe . Light Weight and Great Uniformity
描述: The MPC303050WT is a 30x30x5.0mm low-profile, light-weight, wave type Micro-Porous Ceramic Heat Sink (MPCHS). Due to its highly micro-porous nature it provides a very large surface area compared to conventional copper/aluminium heatsinks and therefore provides excellent heat dissipation without storing heat within its self. The MPCHS also has the lowest thermal capacity of unit volume compared to copper and aluminium heat sinks. Supplied with thermal Silicone adhesive tape. . Non electrically conductive, no antennae effect . Low Profile and light weight . Large surface area compared to Aluminium Heat Sinks . Thermally conductive Silicone adhesive tape
描述: The MHP-1630A-150A is a micro-technology flat and slim shaped Heat Pipe made of aluminium 1050 with groove wick structure. It has many usages for every type of electronic devices also LED application especially for slim, small and flat type of devices such as CPU cooler, memory cooler, LED LCD TV, LED projector and UMPC even more application. It has high performance, excellent heat transmitter and also heat dissipation through its flat area. . Acetone working fluid . Light weight and great uniformity
描述: The W8TR500G-0.5GF is a 0.5mm Thermally Conductive Filler Pad with an extremely high thermal conductivity 5.0W/mK, the highly soft 40 Shore 00, W8TR500G thermal conductive silicone pad is suitable for working environments where the temperature varies greatly. It is able to overcome virtually any adverse environment in addition to conducting heat away from electronic components. As each new generation of electronics equipment exhibits higher performance and more and more power into ever smaller package sizes, it will dissipate power in the form of heat and requires some degree of thermal management. Thermasol markets a variety of thermal management materials in response to the changing needs of the assembly of electronics packaging in notebook computers, high-performance CPU, chipsets, mobile electronic appliances, power conversion and amplification modules etc. . 2.4g/cm³ Specific gravity . <1% Weight loss . 18.51psi Tensile strength . 90.52% Elongation . 2kV/mm Insulation strength . UL94V-0 Flammability rating . -40 to 200°C Operating temperature
描述: The MHP-1220A-150A is a micro-technology flat and slim shaped Heat Pipe made of aluminium 1050 with groove wick structure. It has many usages for every type of electronic devices also LED application especially for slim, small and flat type of devices such as CPU cooler, memory cooler, LED LCD TV, LED projector and UMPC even more application. It has high performance, excellent heat transmitter and also heat dissipation through its flat area. . Acetone working fluid . Light weight and great uniformity
描述: The MHP-1630A-300A is a micro-technology flat and slim shaped Heat Pipe made of aluminium 1050 with groove wick structure. It has many usages for every type of electronic devices also LED application especially for slim, small and flat type of devices such as CPU cooler, memory cooler, LED LCD TV, LED projector and UMPC even more application. It has high performance, excellent heat transmitter and also heat dissipation through its flat area. . Acetone working fluid . Light weight and great uniformity
描述: The MHP-1630A-100A is a micro-technology flat and slim shaped Heat Pipe made of aluminium 1050 with groove wick structure. It has many usages for every type of electronic devices also LED application especially for slim, small and flat type of devices such as CPU cooler, memory cooler, LED LCD TV, LED projector and UMPC even more application. It has high performance, excellent heat transmitter and also heat dissipation through its flat area. . Acetone working fluid . Light weight and great uniformity
描述: The MPC315 is a 465 x 300 x 0.13mm grey Thermal Phase Change Elastomer, bridging the gap between a thermal paste and solid filler pad a phase change elastomer-material. At room temperature it is a solid filler pad but when its transition temperature is reached it softens or melts and behaves more like a paste/grease. It does not dry out, separate or settle and has good compressibility. . 45°C Transition temperature
描述: The SFT90-0.15 is a 0.15mm Silicon Free Thin Film uses ceramic filled polyurethane. It has high thermal conductivity with good electrical insulation properties. It is suitable for use with laser equipment, aerospace HDD applications. . 1.46g/cm³ Density . 4kV Breakdown voltage . 25kV/mm Dielectric breakdown voltage . 150% Elongation . -40 to 125°C Operating temperature
描述: 散热器,999°C/W,40mm,5.25mm,40mm
描述: FLAT ALUMINIUM HEAT PIPE 2.5X50X
描述: FLAT ALUMINIUM HEAT PIPE 2.5X50X
描述: FLAT ALUMINIUM HEAT PIPE 2.5X50X

恒捷供应链