ELECTROLUBE

英特沃斯(北京)科技有限公司，成立于2003年，是业界知名的电子化学品品牌易力高(Electrolube)的原厂商，其母公司的历史可以追溯到1941年，当亨利•金斯伯里在英国成立自已的零部件制造公司，主要生产音量控制部件。正是这时，亨利研制出了一种特殊的油，可提高电气性能和降低移动部件间的摩擦。这一产品促进了整个触点润滑脂市场的发展，是易力高(Electrolube)公司的基础产品。易力高(Electrolube)作为全球技术领先的电子化学品制造商，易力高(Electrolube)产品繁多，包括导热脂、三防漆、封装树脂、电子清洗剂、触点润滑脂和一般维护产品。易力高(Electrolube)产品遍及全球55个国家，并且不断扩展，我们以饱满的创新和服务精神为客户提供优良的服务。

…

展开

分类

产品分类

SKUS:139 截止时间:2026/03/26

所有结果 (139)

FSC400

描述： The FSC400 is a flexible Silicone Coating, fast drying and is designed to protect printed circuit boards, particularly those exposed to high humidity environments. Based on a high quality silicone resin, it exhibits excellent adhesion to a wide variety of substrates and operates within a wide temperature range. Clear translucent liquid and colourless for dry film coating. It can be sprayed, dipped or brushed and the thickness of the coating is typically 25 microns, temperatures of less than 16°C or relative humidity in excess of 75% are unsuitable and recommended drying time is 24 hours at 20°C. . 80kV/mm Dielectric strength . Fluoresces under UV light for ease of inspection . Wide operating temperature range and resistant to mould growth . Non-corrosive to cadmium and zinc plate . Cured coating can be removed with electrolube ultra solve . Excellent dielectric properties FSC needs to be diluted with the appropriate thinners (DCT) before spraying.

SGB20S

描述： The SGB20S is a 20ml contact treatment Grease developed as an extension of the No 2 range (SGA and SOA) with increased plastics compatibility. It significantly increase contact performance and lifetime. -35 to 130°C temperature range and it can be used on all types of electrical contacts and with most types of thermoplastics. It is a non-melting product that will not migrate from vertical surfaces and will provide greater environmental protection than the oil. . Beige colour . Improves contact performance by increasing effective contact area . Enhanced plastics compatibility, suitable for a range of plastics and rubbers . Highly stable synthetic material, fully inhibited against oxidisation and copper corrosion . Excellent penetration and cooling properties, prevents arcing, thus reduces contact wear . Clay thickener

SMF12P

描述： The SMF12P from Electrolube is a surface mount rework flux. This no clean flux in applicator pen form is used for removing and replacing surface mount components. SMF12P is ideal for use with hot air, hot gas or conventional soldering techniques and are idelly suitable for precision applications like telecommunication and computers where high degree of reliability is of major concern. . Flux volume is 12ml . Available in CO2 propelled aerosol and pen type dispenser . 100% ozone friendly . Zero halide content so no cleaning is required . Passes copper plate and copper mirror corrosion (residue) test . Excellent solderability . Low non tacky/non corrosive residue . Quick drying, mildly activated

UR5635RP250G

描述： The EUR5635RP250G is a semi-rigid Polyurethane Resin formulated with a hazy/cloudy appearance. It is ideal for use in protective applications, particularly for dispersing light. Due to a carefully selected blend of components an extremely durable, low viscosity system is achieved which can be used for a wide variety of applications. Its cloudy appearance offers unique light diffusion effect which has seen UR5635 used to great success as an LED resin for both decorative and protective applications. It exhibits superb water and weather resistance, as well as good resistance to acids and alkalis making it suitable for a wide range of environments and an extremely durable potting compound. It is also resistant to UV light making it especially useful as an outdoor LED encapsulant or for use in other applications where it may be exposed to direct sunlight. . Extremely durable . Low viscosity system . Hazy/cloudy white translucent appearance . 1:1 by volume mix ratio, aids ease of processing . Does not contain IPDI, low hazard material . High resistance to weather/UV, acids and alkalis, water and mould growth

EER2183RP250G

ER2188RP1000G

PCM250ML

描述： Peelable Coating Mask

HTC20S

描述： Heat Transfer Compound, White Paste 20mL Syringe

预览规格书

更多资料>

HTG-50ML

描述： Grease; light-brown; high-temperature; paste; 50ml; -20÷200°C

PCB025

描述： Electrolube 25支棉花棒和棉签, 可应用于计算机、传真机、键盘、打印机

预览规格书

更多资料>

UR5547RP500G

描述： The UR5547RP500G is a black Polyurethane Resin with semi-rigid, flame-retardant polyurethane potting resin ideally suited where small and delicate components are involved since the cured product exhibits very little stress, even when thermally cycled. 24 hours cure time at 23°C. . UL94V-0 Flame-retardant at 1.5mm thickness resin . Highly resistant to thermal shocks . Low water absorption and excellent adhesion, high level of protection in a range of environments . Good thermal conductivity, minimises stress by dissipating heat generated by components

GP300S

描述：热缝隙垫,GP300系列,导热,硅胶,3W/m.k,200mmx200mmx0.5mm

GP300SL

描述：热缝隙垫,GP300系列,导热,硅胶,3W/m.k,200mmx200mmx1mm

GP500SL

描述：热缝隙垫,硅胶,5W/m.k,7kV/mm,200mmx200mmx1mm

SWA400H

描述： CLEANERAQUEOUS FC400MLAEROSOL

AFA05L

描述： CONFORMAL COATING, CAN, CLEAR, 5L

ULS01L

描述： ULTRASOLVEULSTIN1L