恒捷供应链
CHT SILICONES
CHT SILICONES
CHT集团是一家中等规模的全球企业，也是特种化学领域的“隐形冠军”，在全球范围内活跃于开发、生产和销售领域。CHT集团的总部位于德国图宾根。CHT集团生产胶粘剂、密封胶、灌封胶、模塑橡胶以及各种化学制品。CHT产品可提高纺织品、建筑材料、颜色、涂料、纸张和农用化学品的质量、功能性和性能，以及消费品行业的清洁和护理产品。
产品分类
SKUS:29 截止时间:2026/03/26
1
1
描述： The QSIL 550-2KG is a 2-component Silicone Elastomer System specially designed for electronic potting applications. It offers good protection against impact damage and can be employed in areas where low flammability is a prerequisite. The cured product is a hard, medium to high modulus elastomer that can be repaired. The component parts have relatively low viscosities and are readily mixed in a simple 1:1 ratio. . Moderate thermal conductivity . Accelerated cure with heat . Viscous liquid rheology . Solvent-free
描述： Large (300x350mm), high quality lint free cloths for general cleaning and drying of many different types of surfaces including glass, plastics, rubbers, metals, LCD and filter screens. Designed to be used with a cleaning solvent appropriate to the surface and soil being cleaned. . Excellent wet strength, may be rinsed and reused . Specifically designed to be tear resistant and non lifting . Ideal for use on delicate surfaces and stencils . Supplied in a resealable plastic pack
描述： The SILCOSET PRIMER is a Silicone Primer complex solvent solution of a silicone resin based primer specially developed for use with 1-part and 2-part condensation cure room temperature vulcanising (RTV) silicone rubbers. It is recommended for improved adhesion to most metals, glass, plastics and composites. Silcoset primer has a pink dye that aids application of uniform thin coatings. It is in the form of pink liquid with characteristic odour and immiscible with water. . Provides good resistance to water immersion . Pink fluorescent dye for easy inspection . 35°C Boiling point . -12°C Flash point
描述： 密封剂,硅树脂,便携水,电气,管,白色,50ML
描述： Encapsulate-Silicone 2-Part Liquid White
描述： 油脂枪,涂抹器,31mmx144mm,用于75ml直面式盒
描述： 密封剂,1部分硅树脂,中性,管,透明,310ml
描述： Qsil-553 is a 100% silicone, solid black elastomer designed for electronic potting applications. The two-component system offers a hard, thermally conductive, low modulus material that is readily repairable. . Thermal conductivity 0.68W/m.K . 100% solids - no solvents . Long pot life . 1:1 mix ratio . Reversion resistant . Cured material 32°IRDH
描述： 密封剂,硅树脂,中性固化,电气/电子,管,黑色,310ML
描述： 密封剂,硅树脂,通用,管,黑色,75ML
描述： 密封剂,硅树脂,中性固化,电气/电子,管,透明,75ML
描述： 1 Part neutral self levelling adhesive sealant
描述： 密封剂,硅树脂,热导电胶粘剂,管,灰色,310ML
描述： 密封剂,1部分硅树脂,中性,盒,红色,310ml
描述： 封装硅树脂,光学透明
描述： 硅塑封胶,透明,双包装
描述： 封装硅树脂,1:1双组分
描述： 硅树脂,共形涂层
描述： The PRIMER NO3 is a Primer Coating specially formulated silicone based primer for use with addition cure silicone rubbers. This primer imparts good adhesion to most metals, natural and synthetic rubber, polyester and nylon fabrics. It is recommended as a primer for use on non-porous surfaces. In some cases this product has also been found to act as a barrier to substrates that usually cause inhibition to platinum cure systems. It is in the form of straw yellow liquid with characteristic of solvent odour and immiscible with water. . Flammable . 43°C Flash point . 20 minutes Tack free time . 0.9kg/l Relative density
描述： The SE3000 2KG KIT is a 2-component liquid addition-cure Silicone System cures at ambient or elevated temperature to a moderately hard thermally conductive silicone rubber with a very low viscosity, a low volatile content and provides excellent environmental protection. It is recommended for the encapsulation of highly populated electronic assemblies requiring high flow between the components. It is completely neutral and will not cause corrosion of electrodes and other metal parts. . Thermally conductive . Low viscosity . Neutral and non-corrosive . Low volatility . Low modulus
描述： The QSIL 216 5.5KG is a 2-component optically clear Silicone Elastomer System specially designed for electronic potting applications. It offers good protection against impact damage and can be employed in areas where low flammability is a prerequisite. The cured product is a hard, medium to high modulus elastomer that can be repaired. The component parts have relatively low viscosities and is readily mixed in a simple 10:1 ratio. . Non yellowing under UV light . Optically clear . Low viscosity . Wide temperature range
