NXP/JENNIC

JN5148-EK010

JN5148-001-M00

描述： The JN5148-001-M00 is ZigBee PRO and IEEE802.15.4 Wireless Microcontroller Module with an integrated antenna belongs to JN5148-001-Myy family featuring range of ultra low-power, high-performance surface-mount modules targeted at low-power wireless networking applications, enabling users to realise products with minimum time-to-market and at the lowest cost. The modules remove the need for expensive and lengthy development of custom RF board designs and test suites. They use JN5148 wireless microcontroller to provide a comprehensive solution with large memory, high CPU and radio performance and all RF components are included. All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development. The IEEE802.15.4 MAC and elements of the wireless networking stacks are included in the device ROM. . 2.4GHz IEEE802.15.4 JenNet, JenNet-IP and ZigBee PRO applications . Sleep current (with active sleep timer) 2.6µA . Up to 1km range (Ext antenna) . TX power +2.5dBm, TX current 15mA . Receiver sensitivity -95dBm, RX current 17.5mA . Micro miniature module solutions . Ready to use in products . 32-bit RISC CPU, up to 32MIPs with low power . 128kB RAM stores system data and bootloaded program code . 4-input 12-bit ADC, 2 12-bit DACs, 2 comparators

JN5139-Z01-M01R1V

描述： JN5139-Z01-M01R1V is an JN5139 module family. It is featured with SMA antenna connector. The JN5139-xxx-Myy family is a range of surface mount modules that enables users to implement systems using Jennic"s own JenNet networking stack, IEEE802.15.4 or ZigBee with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The module use Jennic"s JN5139 wireless microcontroller to provide a comprehensive solution with high radio performance and all RF components are included. All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development. . 2.4GHz IEEE802.15.4 and ZigBee compatible . 2.7-3.6V operation . Sleep current (with active sleep timer) 2.6µA . Micro miniature module solutions . Ready to use in products . Minimises product development time . No RF test required for systems . Compliant with FCC part 15 rules, ETSI ETS 300-328 and Japan ARIB STD-T66 . Production volumes supplied pre-programmed with application software . Communicates up to 1KM range

JN5148-001

JN5139-Z01-M00R1T

描述： JN5139-Z01-M00R1T

JN5139-EK010

描述： ZigBee Evaluation Kit