大联大友尚集团推出基于ST STM32F103与TI CC2564智能车载双模蓝牙方案
原标题:大联大友尚集团推出基于ST STM32F103与TI CC2564智能车载双模蓝牙方案
2016年8月16日,致力于亚太地区市场的领先半导体元器件分销商---大联大控股宣布,其旗下友尚推出基于意法半导体(ST)STM32F103与德州仪器(TI)CC2564的智能车载双模蓝牙方案WLT2564S。该车载双模蓝牙方案可以服务于逆变器为12v转220v 1500w的电源转换器,用户通过蓝牙无线连接到手机或平板计算机,可以通过APP来监控智能电源转换器工作时的各种状况,如超载保护、短路保护、过压保护、欠压保护、欠压报警、过温保护、电瓶电源使用到转换器警报提示等相关使用安全控制和提示功能。
随着车载电源逆变器的普及率增高,人们出行时越来越习惯于使用逆变器连接蓄电池带动电器及各种工具工作,把家用电器连接到电源转换器的输出端,人们就能在汽车内使用各种电器。手机、笔记本电脑、数码摄像机、照相机、照明灯、电动剃须刀、游戏机、笔记本电脑、电动工具、车载冰箱及各种旅游、野营、医疗急救电器等都可以使用车载逆变器连接充电并使用。
大联大友尚推出的智能车载双模蓝牙方案WLT2564S可以帮助用户进一步实现经由移动装置,实现监控、观察电源转换器的重要信息的需求或者实时接收重要的警报提示的需求。方案采用TI CC2564 Supports Bluetooth 4.0 and Dual-Mode(BR/EDR/LE)Controller,WLT2564S双模蓝牙透传模块,同时集成了STM32F103系列MCU、Flash(128KB-1M)、RAM(20KB-96KB)。方案中板载采用高性能陶瓷2.4GHz天线,可以外接;尺寸为19*30mm,为邮票孔管脚;系统支持UART/SPI,UART接口最高可达4Mbps;支持I2C接口,可用于外接加密,支持PCM接口、支持I2S接口;支持透明协议数据传输模式,可提供AT+指令集配置;支持蓝牙SPP/SPPLE/HFP/MAP/PXP/A2DP/AVRCP/ANP/HID等。
大联大友尚同时针对该智能车载双模蓝牙方案提供软件平台,平台可以灵活地帮助工程师完成方案开发,同时可以提供定制化服务。
图示1-WLT2564S模块线路图
图示2-WLT2564S方案方框图
The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
Key Features
ARM®32-bit Cortex®-M3 CPU Core
72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
Single-cycle multiplication and hardware division
Memories
64 or 128 Kbytes of Flash memory
20 Kbytes of SRAM
Clock, reset and supply management
2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC
PLL for CPU clock
32 kHz oscillator for RTC with calibration
Low-power
Sleep, Stop and Standby modes
VBAT supply for RTC and backup registers
2 x 12-bit, 1 μs A/D converters (up to 16 channels)
Conversion range: 0 to 3.6 V
Dual-sample and hold capability
Temperature sensor
DMA
7-channel DMA controller
Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
Up to 80 fast I/O ports
26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
Debug mode
Serial wire debug (SWD) & JTAG interfaces
7 timers
Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
16-bit, motor control PWM timer with dead-time generation and emergency stop
2 watchdog timers (Independent and Window)
SysTick timer 24-bit downcounter
Up to 9 communication interfaces
Up to 2 x I2C interfaces (SMBus/PMBus)
Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 2 SPIs (18 Mbit/s)
CAN interface (2.0B Active)
USB 2.0 full-speed interface
CRC calculation unit, 96-bit unique ID
Packages are ECOPACK®
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。