基于Microsemi的PD70211高达95W室内外PoE解决方案
原标题:Microsemi PD70211高达95W室内外PoE解决方案
Microsemi公司的PD70211是集成了开关稳压器的以太网供电的PD控制器,支持IEEE802.3af, IEEE802at, HDBaseT和通用2/4线配置.其前端包括先进的分类区块,支持2/3/4/6级分类;PWM电流模式部分支持同步反激和有源钳位前向拓扑以及降压和升压等.主要用在室内外PoE.本文介绍了PD70211主要特性,功能框图和典型应用框图,以及评估板PD70211EVB72FW-12主要特性,框图,电路图,材料清单和PCB设计图.
PD70211 is an advanced PD Interface IC with integrated switching (PWM) regulator control for Powered Devices in PoE applications. It supports IEEE802.3af, IEEE802at, HDBaseT and general 2/4-pair configurations.
The PD70211 front-end includes an advanced classification block that supports 2, 3, 4, and 6 event classification. Using the SUPP_Sx pins, it also identifies which of the four pairs of the cable actually receives power and generates appropriate flags.
The IC features an internal bleeder for discharging the input capacitor of the DC/DC converter rapidly, so as to ensure fast re-detection and port power-up in case of sudden removal and re-insertion of the Ethernet cable into the RJ-45. The advanced PWM current-mode section supports synchronous Flyback and Active clamp Forward topologies, as well as Buck, Boost etc.
PD70211主要特性:
Supports IEEE802.3af/at, HDBaseT and other 2- pair/4-pair configurations
Wall-adapter support (Rear Aux method)
PD detection & programmable classification
2,3,4, and 6 event classification
Integrated 0.3Ω isolating (series-pass) FET
Inrush current limiting
Less than 10μA offset current during detection
Advanced PWM section
Lead-free MLPQ-36 (6×6 mm) package
PD70211应用:
HDBaseT up to 95 Watts
IEEE802.3af and 802.3at
Power Forwarding
Indoor and outdoor PoE
图1.PD70211框图(前端部分)
评估板PD70211EVB72FW-12
Microsemi’s PD70211EVB72FW-12 Evaluation Board provides designers with an environment needed for evaluating the performance and implementation of PD applications based on PD70211 controller.
The board is using a single PD controller, PD70211ILQ, to support the Detection, Class, and Power Supplying phases on the 4 Pairs of the Cat5 cable. The board supports sync detection of the 4 pairs. PD70211ILQ supports the current of the HDBaseT over 4 Pairs, which is more than twice the power of a standard IEEE802.3AT Type 2 interface.
图4.评估板PD70211EVB72FW-12框图
图5.评估板PD70211EVB72FW-12外形图
评估板PD70211EVB72FW-12主要特性:
Designed to support Data and Spare current by a single PD70211A device
Power is supplied through the 4-pairs of the Cat5 cable
Wall Adapter input–Standard Barrel Jack available for connecting to an external 48-54V Wall Adapter.
Data pass-through connector
On board PSE class type LED indicators
On board AT detected LED indicator
On board 4P_AT detected LED indicator
On board HD detected LED indicator
On board 4P_HD detected LED indicator
On board Power Good LED indicator which may be configured to monitor PD Front End or VPP UVLO.
Ta: -40°to +70℃ (with derating curve)
RoHS compliant
评估板PD70211EVB72FW-12材料清单:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。