基于Linear公司的LTM4647 30A降压DC-DC电源模块(μModule)解决方案
原标题:Linear LTM4647 30A降压DC-DC电源模块(μModule)解决方案
Linear公司的LTM4647是完整的30A降压DC/DC电源模块(μModule)稳压器,集成了开关控制器,功率FET,电感和支持元件.输入电压4.7V-15V,输出电压0.6V-1.8V由单个外接电阻设定.效率高达87%,主要用在通信,网络和工业设备,点负载稳压器.本文介绍了LTM4647主要特性,框图和多种应用电路,以及演示板DC2141A主要特性,测量图,电路图和材料清单.
The LTMR4647 is a complete 30A output switching modestep-down DC/DC μModuleR (power module) regulator.Included in the package are the switching controller, powerFETs, inductor and all supporting components. Operatingover an input voltage range of 4.7V to 15V, the LTM4647supports an output voltage range of 0.6V to 1.8V, set bya single external resistor. Only a few input and outputcapacitors are needed.
Its high efficiency design delivers 87% efficiency from 12Vinput to 1.0V output with 30A continuous load current.High switching frequency and a current mode architectureenable a very fast transient response to line and loadchanges without sacrificing stability. The device supportsfrequency synchronization, programmable multiphaseoperation, N+1 phase redundancy, and output voltagetracking for supply rail sequencing.
Fault protection features include overvoltage and overcurrentprotection. The power module is offered in a spacesaving 9mm × 15mm × 5.01mm BGA package. TheLTM4647 is available with SnPb (BGA) or RoHS compliantterminal finish.
LTM4647主要特性:
n4.7V to 15V Input Voltage Range
n0.6V to 1.8V Output Voltage Range
n30A DC Output Current
n±1.2% Total DC Output Voltage Error (–40°C to 125°C)
nHigh Reliability N + 1 Phase Redundancy Supported
nInternal or External Control Loop Compensation
nDifferential Remote Sense Amplifier for PrecisionRegulation
nCurrent Mode Control/Fast Transient Response
nMultiphase Current Sharing Up to 180A
nBuilt-In Temperature Monitoring
nSelectable Pulse-Skipping, Burst ModeR Operation
nSoft-Start/Voltage Tracking
nFrequency Synchronization
nOutput Overvoltage Protection
nOutput Overcurrent Foldback Protection
n9mm × 15mm × 5.01mm BGA Package
LTM4647应用:
nTelecom, Networking and Industrial Equipment
nPoint-of-Load Regulation
图1.LTM4647简化框图
图2.LTM4647应用电路:输入6V-15V,输出1.0V/30A
图3.LTM4647应用电路:输入4.7V-5.5V,输出1.2V/30A
图4.LTM4647应用电路:输入6V-15V,输出1.0V/60A
图5.LTM4647应用电路:输入6V-15V,跟踪输出1.0V和1.2V
图6.LTM4647应用电路:3相90A,1相30A冗余
图7.LTM4647应用电路:4相1V 120A
演示板DC2141A
Demonstration circuit 2141A features the LTM®4647EY,a 30A high efficiency, switch mode step-down powerμModule regulator. The input voltage range is from 6V to15V. To use DC2141A for input voltage range from 4.7V to6V, connect INTVCC to SVIN (change R22 from OPT to 0Ω),DRVCC to VIN (change R21 from 0Ω to OPT, R28 from OPTto 0Ω). The output voltage range is 0.6V to 1.8V. Deratingis necessary for certain VIN, VOUT, frequency and thermalconditions. The DC2141A offers the TRK/SS pin allowingthe user to program output tracking or soft-start period. Theboard operates in continuous conduction mode in heavyload conditions. For high efficiency at low load currents,the MODE_PLLIN jumper selects pulse-skipping mode fornoise sensitive applications or Burst Mode® operation inless noise sensitive applications. The MODE_PLLIN pinalso allows the LTM4647 to synchronize to an externalclock signal (between 400kHz and 800kHz). DC2141Ahas the option of choosing both internal and externalcompensation circuit for LTM4647. Tying the PHASMDpin to different voltage generates certain phase differencebetween MODE_PLLIN and CLKOUT. The LTM4647 datasheet must be read in conjunction with this demo manualprior to working on or modifying demo circuit DC2141A.
图8.演示板DC2141A外形图
演示板DC2141A材料清单:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。