基于TI公司的TIDA-00804汽车i.MX6Q四核处理器电源参考设计
原标题:TI TIDA-00804汽车i.MX6Q四核处理器电源参考设计
TI公司的TIDA-00804参考设计是用于i.MX6Q四核应用处理器的低成本分立电源解决方案,所有的DC/DC稳压器工作在高于AM无线广播频带,以避免干扰,输入电压6V-42V,主要应用在汽车娱乐系统单元和汽车仪表盘.本文介绍了TIDA-00804参考设计主要特性,框图和系统级框图,电路图,材料清单和PCB设计图.
Automotive i.MX6 Quad Core Processor Power Reference Design (ACTIVE) TIDA-00804
The TIDA-00804 reference design is a low-cost discrete power solution for the i.MX6Q quad core application processor. All the DCDC regulators operate at frequencies above the AM radio broadcast band to avoid interference with the radio and to provide a small solution size due to smaller filter components. The first stage DC-DC converter can support a voltage input range of 6V to 42V, allowing the design to support start-stop operation as well as load dump. The second stage DC-DC converters provide all the necessary power rails to power the i.MX6Q. No power sequencer is necessary for this design. The PWB is a 4 layer board with 2 oz. copper to provide good power dissipation at 85 C ambient.
TIDA-00804设计主要特性:
• Wide Input Voltage Range: Off-Battery 6-V to 42-V Power Supplies Support Start-Stop System and Load Dump
• The DC-DC Regulators All Operate Above 1.8 MHz to Avoid AM Band Interference
• Small Form Factor: 75 mm × 58 mm Circuit Board Dimensions
• No Power Sequencer Necessary
• Less Than 5% Ripple on All Power Rails
TIDA-00804设计特征应用:
• Automotive Infotainment Head Unit
• Automotive Instrument Cluster
图1. TIDA-00804设计板外形图
图2.带图像显示的TIDA-00804设计板系统框图
图3. TIDA-00804设计板框图
图4. TIDA-00804设计板电路图(1)
TIDA-00804设计板材料清单:
详情请见:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。