基于PowerInt公司的LYT7503-750440W LED驱动器参考设计DER-570
原标题:PowerIntLYT7503-750440W LED驱动器参考设计DER-570
Power Integrations公司的LYT7503-7504是LYTSwitch™-7系列产品,是切相调光单级LED驱动器,具有PFC和恒流输出,并集成了高压MOSFET和可变开态临界导通模式(CrM)控制器,功率因素大于0.9,效率大于85%,725V MOSFET增加了抗线路电压浪涌特性,具有低EMI,主要用在LED照明如吸顶灯等.本文介绍了LYT7503-7504产品亮点,框图,7.5W LED驱动器电路图以及40W大范围调光非隔离降压LED驱动器参考设计DER-570主要特性,电路图,材料清单和PCB设计图.
The LYTSwitch™-7 family is ideal for single-stage, high PF, constant current LED dimmable applications.
The family incorporates a high-voltage MOSFET with a variable on-time CrM controller. Extensive protection features with minimum external components provide industry leading power density and functionality.
The CrM operation results in low turn-on losses and reduces cost of output diode (slower reverse-recovery type can be used).
LYTSwitch-7 devices are suitable for applications from 4 W to 22 W. For more information, see Application section. LYTSwitch-7 peak current mode operation is suitable for TRIAC applications without the need for an active bleeder.
LYT7503-7504产品亮点:
Single-Stage PFC + Accurate CC Output
±3% CC regulation in single line input voltage applications
Power factor >0.9
High efficiency >85%
Robust 725 V MOSFET for increased line voltage surge resistance
Critical Conduction Mode (CrM) buck
Low EMI
Excellent line noise and transient rejection
Dimming Highlights
Fast turn-on (<500 ms)
Low pop-on
Better than 10:1 dimming ratio
Simple passive R-C damper
Monotonic dimming profile
Design Flexibility
Wide input (90 VAC – 308 VAC) and output voltage range operation
2 family members cover power range for optimum device selection
Requires no inductor bias winding
Small form factor package – SO-8
Highest Reliability
Industry’s lowest component count dimming solution
Comprehensive protection features with auto-restart Input and output overvoltage protection (OVP)
Output short-circuit protection
Open-loop protection
Advanced thermal control Thermal foldback ensures that light continues to be delivered at elevated temperatures
Over-temperature shutdown provides protection during fault conditions
图1.LYT7503-7504框图
图2. LYT7503-7504 7.5W LED驱动器电路图
Schematic from DER-561 7.5 W, 60 V, 125 mA Dimmable Non-Isolated A19 LED Driver for Wide Input Range: 90 – 300 V VAC using LYT7503D in Low-Side Buck Configuration.
40W大范围调光非隔离降压LED驱动器参考设计DER-570
40WLED驱动器参考设计DER-570主要特性:
• Single-stage power factor corrected, PF >0.9 measured at 115 VAC input
• Two-rail outputs in a single board
• Accurate constant current regulation for both outputs, ±5%
• Meets <30% flicker requirement for each output
• Highly energy efficient, >85% at
• Low cost and low component count for compact PCB solution
• Integrated protection features
• No-load output protection
• Output short-circuit protection
• Overcurrent protection
• Thermal fold-back protection
• Over temperature protection
• No damage during line brown-out or brown-in conditions
• Meets IEC 2.5 kV ring wave, 1 kV differential surge
• Meets EN55015 conducted EMI
This engineering report describes an LED driver configured as a low-side buck utilizing the LYT7504D from the LYTSwitch-7 family of devices. This is a low component dimmable LED driver designed to power a dual output 52 V LED voltage string at 380 mA output current each, from an input voltage range of 100 VAC to 300 VAC. Dimming performance is optimized at low line input (i.e. 120 VAC), while maintaining accurate regulation for non-dimmable high-line input.
DER-570 offers a compact size solution for 40 W LED drivers for ceiling light applications. The key design goals were high efficiency, accurate constant current regulation for both outputs and low component count.
图3.40W LED驱动器参考设计DER-570外形图
图4.40W LED驱动器参考设计DER-570外形图(顶视图)
图5.40W LED驱动器参考设计DER-570外形图(底视图)
40W LED驱动器参考设计DER-570主要指标:
40W LED驱动器参考设计DER-570材料清单:
详情请见:
lytswitch-7_family_datasheet.pdf
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。