原标题：TIAWR1243汽车77和79GHz FMCW收发器解决方案

　　TI公司的AWR1243是单片77GHz和79GHz频率调制连续波(FMCW)收发器,具有基于分数N PLL的超精密啁啾引擎,简化了汽车雷达传感器在76-81GHz的实现方案.采用低功耗45nm RFCMOS工艺,单片实现了内置PLL和A2D转换器的3TX,4RX系统.TX发送功率12dBm,RX噪音15dB (76-77GHz), 16dB(77-81GHz),1MHz时的相位噪音–94 dBc/Hz (76-77 GHz),–91 dBc/Hz (77 - 81 GHz),内置了校准和自测试等功能.主要用在自动高速公路驾驶,自动紧急刹车和自适应巡航控制.本文介绍了AWR1243主要特性,功能框图,短中远距离雷达框图,参考电路,以及AWR1443 BoosterPack™评估板主要特性,框图,电路图,材料清单和PCB设计图.

　　The AWR1243 device is an integrated single-chip FMCW transceiver capable of operation in the 76- to 81-GHz band. The device enables unprecedented levels of integration in an extremely small form factor. AWR1243 is an ideal solution for low power, self-monitored, ultra-accurate radar systems in the automotive space.

　　The AWR1243 device is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Automotive Radar sensors in the band of 76 to 81 GHz. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and A2D converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform solution including reference hardware design, software drivers, sample configurations, API guide, and user documentation.

　　AWR1243主要特性:

　　FMCW Transceiver

　　Integrated PLL, Transmitter, Receiver, Baseband, and A2D

　　76- to 81-GHz Coverage With 4 GHz Available Bandwidth

　　Four Receive Channels

　　Three Transmit Channels (Two Can be Used Simultaneously)

　　Ultra-Accurate Chirp Engine Based on Fractional-N PLL

　　TX Power: 12 dBm

　　RX Noise Figure:

　　15 dB (76 to 77 GHz)

　　16 dB (77 to 81 GHz)

　　Phase Noise at 1 MHz:

　　–94 dBc/Hz (76 to 77 GHz)

　　–91 dBc/Hz (77 to 81 GHz)

　　Built-in Calibration and Self-Test

　　Built-in Firmware (ROM)

　　Self-calibrating System Across Frequency and Temperature

　　Host Interface

　　Control Interface With External Processor Over SPI

　　Data Interface With External Processor Over MIPI D-PHY and CSI2 V1.1

　　Interrupts for Fault Reporting

　　ASIL B Capable

　　AECQ100 Qualified

　　AWR1243 Advanced Features

　　Embedded Self-monitoring With No Host Processor Involvement

　　Complex Baseband Architecture

　　Option of Cascading Multiple Devices to Increase Channel Count

　　Embedded Interference Detection Capability

　　Power Management

　　Built-in LDO Network for Enhanced PSRR

　　I/Os Support Dual Voltage 3.3 V/1.8 V

　　Clock Source

　　40.0-MHz Crystal With Internal Oscillator

　　Supports External Oscillator at 40 and 50 MHz

　　Easy Hardware Design

　　0.65-mm Pitch, 161-Pin 10.4 mm × 10.4 mm Flip Chip BGA Package for Easy Assembly and Low-Cost PCB Design

　　Small Solution Size

　　Supports Automotive Temperature Operating Range

　　AWR1243应用:

　　• Automated Highway Driving

　　• Automatic Emergency Braking

　　• Adaptive Cruise Control

　　AWR1443 BoosterPack™评估板

　　The AWR1443 BoosterPack™ is an easy-to-use evaluation board for the single-chip AWR1443 mmWavesensing device from TI, with direct connectivity to the TI MCU LaunchPad™ ecosystem. The evaluationboard contains everything needed to start developing on a low-power ARM®-R4F controller. Theevaluation board includes onboard emulation for programming and debugging, onboard buttons, andLEDs, for quick integration of a simple user interface. The standard 20-pin BoosterPack headers make the evaluation board compatible with a wide variety of TI MCU LaunchPads and enables easy prototyping.

　　The AWR1243 BoosterPack is an evaluation board for the AWR1243 mmWave high-performance frontend. The evaluation platform enables raw capture of ADC data from the front end and evaluation of RFperformance.

　　AWR1443 BoosterPack™评估板主要特性:

　　• 40-pin LaunchPad standard that leverages the LaunchPad ecosystem

　　• XDS110-based JTAG emulation with serial port, for onboard QSPI flash programming (for AWR1443)

　　• Backchannel UART through USB to PC, for logging purposes

　　• Onboard antenna

　　• 60-pin high density (HD) connector, for raw ADC data over CSI, or the high-speed debug interface

　　• Onboard CAN transceiver (for AWR1443)

　　• One button and two LEDs, for user interaction

　　• 5-V power jack, to power the board

　　AWR1443 BoosterPack™评估板包括:

　　• AWR1443BOOST or AWR1243BOOST

　　• Mounting brackets, screws, and nuts, to allow placing the PCB vertical

　　• Mirco USB cable to connect to the PC

　　图.AWR1443 BoosterPack™评估板外形图

　　详情请见:

awr1243.pdf

swru507.pdf