模块板卡:基于nRF52832主控芯片的小尺寸蓝牙模块MS50SF6解决方案
原标题:小尺寸蓝牙模块MS50SF6
应用领域:智能家电
方案类型:模块板卡
主要芯片:nRF52832
方案概述
1.概述
MS50SF6是采用Nordic nRF52832的WLCSP封装设计的贴片蓝牙4.2模块。它是一款高性价比、低功耗的片上系统(Soc)解决方案,适合蓝牙低功耗的应用,它降低了建立网络节点的成本。它有一个ARM内核Cortex-M4F的RF收发器,MCU有更快的运行速度,内核运行速度达到64Mhz,它能够实现更强大的运算能力以及浮点运算的技术,能实现非常复杂的算法。512KB FLASH程序空间、64KB RAM和其它功能强大的配套资源。它适用于低功耗系统、超低的睡眠电流及运行时的低功耗。
产品特征
蓝牙低功耗兼容技术
支持远程的应用
精确的接收信号强度检测(RSSI)
符合CE (欧洲)和FCC(美国)认证标准
内含高性能的ARM Cortex-M4F
带AES安全协议处理器
2.应用领域
低功耗蓝牙系统
移动配件
运动和健身设备
消费类电子
人机接口设备
健康和医疗
3、模块尺寸
4.模块参数
参数 | 数值 | 备注 |
工作电压 | 1.8-3.6V | DC |
工作频率 | 2400-2483MHz | Programmable |
频率误差 | +/- 20KHz | Null |
发射功率 | -40 ~ +4dBm | Programmable |
接收灵敏度 | -96dBm | High gain mode |
接收电流 | 5.4mA | RX only run current(DCDC, 3V) 1Msps |
发射电流 | 7.5mA | Transmission power +4dBm, RX only run current(DCDC, 3V) 1Msps |
5.3mA | Transmission power 0dBm | |
睡眠功耗 | 1uA以下 | Power mode 3, connection-less state |
遥控距离 | / | BER<0.1%, Open space |
天线 | 50ohm | Null |
模块尺寸 | 9*8.5*2mm | Null |
传输距离 | / | 半径距离 |
5.支持设备
支持设备系统 | 支持设备型号 |
iOS 7.0及以上 | iPhone 4S,iPhone 5, iPhone 5S,iphone 6, iPhone 6p,iPad 3, iPad mini, iPad air等 |
Android 4.3及以上 | 华为,小米,OPPO,魅族,VIVO,Samsung Galaxy S III, HTC One 等 |
6.注意事项
1、该芯片中有CMOS器件,在运输、使用过程中要注意防静电。
2、器件接地要良好,减少寄生电感。
3、尽量手工焊接,如需机贴,请控制回流焊温度不要超过205摄氏度。
4、模块天线下面不要铺铜。
5、天线应远离其他电路,防止辐射效率变低和影响其他电路正常使用。
6、模块放置应尽量远离其他低频电路,数字电路。
7、模块的接入电源建议使用磁珠进行隔离。
7.质量保证
工厂通过了ISO9001质量体系认证。每一个产品都经过严格测试(发射功率测试、灵敏度测试、功耗测试,稳定性测试、老化测试等)。
【nRF52832】
Advanced performance Bluetooth5/ANT/2.4GHz proprietary SoC
Active
The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC ideally suited for Bluetooth® low energy (previously called Bluetooth Smart), ANT and 2.4GHz ultra low-power wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51 Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.
Bluetooth 5
The nRF52832 has hardware support on-chip for Bluetooth 5. This includes high throughput and advertising extension.
Processing power
The nRF52832 incorporates a powerful Cortex-M4F processor enabling the most demanding applications with complex arithmetic requirements to be realized in a single chip solution. The IC supports DSP instructions, a Floating Point Unit (FPU), single-cycle multiply and accumulate, and hardware divide for energy-efficient process of computationally complex operations.
Multiprotocol radio
The 2.4GHz radio supports multiple protocols including Bluetooth Low Energy, ANT and 2.4GHz proprietary. The radio has high definition RSSI and highly automated functionality, including EasyDMA for direct memory access during packet send and retrieve. Nordic provides protocol stacks for Bluetooth Low Energy. ANT protocol stacks are available from ANT here: www.thisisant.com.
Power Efficiency
The nRF52832 SoC is an extremely power efficient device that can run from a supply between 1.7V and 3.6V. All individual peripherals and clocks offer complete flexibility of power down when not required for task operation thus minimizing power consumption to a minimum. The IC has a comprehensive system of automated and adaptive power management features. These features range across the entire IC’s operation from power supply switching to peripheral bus/EasyDMA memory management, to automated shut down of all but the absolute essential peripherals required to perform a task.
On-chip NFC tag
NFC™-A tag support is included on chip. Out-of-Band (OOB) pairing using NFC simplifies the process of authenticated pairing between two Bluetooth devices by exchanging authentication information over an NFC link.
Package options
The nRF52832 is available in 6x6mm 48-pin QFN packages and 3.0x3.2mm ultra-compact wafer-level chip-scale packages (WL-CSP).
SoftDevice
The nRF52832 is supported by the S132 SoftDevice, a Bluetooth 5 pre-qualified protocol stack. Click for more information on nRF52 Series in our Infocenter
FEATURES
Single chip, highly flexible, 2.4 GHz multi-protocol SoC
32-bit ARM Cortex-M4F Processor
1.7v to 3.6v operation
512kB flash + 64kB RAM
Supports concurrent Bluetooth low energy/ANT protocol operation
On-chip NFC tag for Out-of-Band (OOB) pairing
Up to +4dBm output power
-96dBm sensitivity, Bluetooth low energy
Thread safe and run-time protected
Event driven API
On air compatible with nRF24L and nRF24AP series
2 data rates (2Mbps/1Mbps)
PPI - maximum flexibility for power-efficient applications and code simplification
Automated power management system with automatic power management of each peripheral
Configurable I/O mapping for analog and digital I/O
3 x Master/Slave SPI
2 x Two-wire interface (I²C)
UART (RTS/CTS)
3 x PWM
AES HW encryption
12-bit ADC
Real Time Counter (RTC)
Digital microphone interface (PDM)
On-chip balun
APPLICATIONS
Internet of Things (IoT)
Wearables
SmartHome sensors
Connected white goods
Computer peripherals
Voice-command smart remotes
A4WP ‘Rezence’ wireless charging
Beacons
Sports and fitness sensors and hubs
Connected health products
Smart watches
RC Toys
Interactive games
Building automation and sensor networks
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。