基于PowerInt公司SID1183K单路IGBT和MOSFET驱动方案
原标题:PowerInt SID1183K单路IGBT和MOSFET驱动方案
PowerInt公司的SID1183K是eSOP封装的单路IGBT和MOSFET驱动器,采用创新的固态隔离器FluxLink技术的电隔离.峰值输出驱动电流8A,其它特性包括具有先进软关断(ASSD)的短路保护(DESAT),欠压锁住(UVLO),适合于1700V IGBT和MOSFET开关,开关频率高达75kHz,传输时延260ns,传输时延抖动±5 ns,工作温度-40℃ 到125℃,主要用在通用和伺服驱动,UPS,太阳能,焊接逆变器和电源.本位介绍了SID1183K产品亮点,框图和应用电路,以及采用scaLE™- iDriver SID1183K的通用基板参考设计主要特性,电路图,材料清单和PCB设计图.
The SID1183K is a single channel IGBT and MOSFET driver in an eSOP package. Galvanic isolation is provided by Power Integrations’ innovative solid insulator FluxLink technology. The up to 8 A peak output drive current enables the product to drive devices up to 600 A without requiring any additional active components. For gate drive requirements that exceed the stand-alone capability of the SID1183K, an external booster may be added. Stable positive and negative voltages for gate control are provided by one unipolar isolated voltage source.
Additional features are short-circuit protection (DESAT) with Advanced Soft Shut Down (ASSD), undervoltage lock-out (UVLO) for primary-side and secondary-side and rail-to-rail output with temperature and process compensated output impedance guarantee safe operation even in harsh conditions.
Controller (PWM and fault) signals are compatible with 5 V CMOS logic, which may also be adjusted to 15 V levels by using external resistor divider.
SID1183K产品亮点:
Highly Integrated, Compact Footprint
Split outputs providing up to 8 A peak drive current
Integrated FluxLink™ technology providing galvanic isolation between primary-side and secondary-side
Rail-to-rail stabilized output voltage
Unipolar supply voltage for secondary-side
Suitable for 1700 V IGBT and MOSFET switches
Up to 75 kHz switching frequency
Low propagation delay time 260 ns
Propagation delay jitter ±5 ns
-40℃ to 125℃ operating ambient temperature
High common-mode transient immunity
eSOP package with 9.5 mm creepage and clearance distances
Advanced Protection / Safety Features
Undervoltage lock-out protection for primary and secondary-side (UVLO) and fault feedback
Short-circuit protection using VCE SAT monitoring and fault feedback
Advanced Soft Shut Down (ASSD)
Full Safety and Regulatory Compliance
100% production partial discharge test
100% production HIPOT compliance testing at 6 kV RMS 1 s
Basic insulation meets VDE 0884-10
Green Package
Halogen free and RoHS compliant
SID1183K应用:
General purpose and servo drives
UPS, solar, welding inverters and power supplies
采用SCALE™- iDriver SID1183K的通用基板参考设计
This application proposal provides a circuit design for a general purpose base board for driving various IGBTpower modules.
The main features of the design are:
Suitable for IGBT power modules in various housings such as 17 mm dual, 17 mm six-pack,62 mm, PrimePACK™, etc. with a maximum blocking voltage of 1700 V
Short-circuit detection with Advanced Soft Shut Down (ASSD)
Electrical command inputs and status outputs
0 V / 5 V command input logic
0 V / 5 V status output logic
Minimum pulse suppression
Interlock of command inputs
5 V supply voltage
Single PCB solution with soldered-in gate driver IC
通用基板参考设计主要特性:
Suitable for IGBT power modules in various housings
Up to 1200 V DC-link voltage
Electrical interfaces
Basic Active Clamping
Short-circuit detection with Advanced Soft Shut Down
图.通用基板参考设计外形图
通用基板参考设计材料清单:
详情请见:
1700v_scale-idriver_family_datasheet.pdf
责任编辑:Davia
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。