原标题：ADI AD7617 16通路14位数据采集系统(DAS)解决方案

　　ADI公司的AD7617是16通路同步取样的14位数据采集系统(DAS),包括了模拟输入箝位保护,一个双路14 位电荷再分配逐次逼近寄存器(SAR)模数转换器(ADC),一个灵活的数字滤波器,2.5 V 基准电压源和基准电压缓冲器以及高速串行和并行接口(SPI)/QSPI™/DSP/MICROWIRE,+5 V 电源供电,可以适应±10 V、±5 V 和 ±2.5 V真正双极性输入信号,主要用在电力线路监控,保护继电器,多相电机控制,仪表和控制系统和数据采集系统 (DAS).本文介绍了AD7617主要特性,功能框图,外币部连接电路,以及评估板EVAL-AD7616SDZ/EVAL-AD7616-PSDZ主要特性,框图,测量建立图,电路图,材料清单和PCB设计图.

　　The AD7617 is a 14-bit, DAS that supports dual simultaneoussampling of 16 channels. The AD7617 operates from a single +5 Vsupply and can accommodate ±10 V, ±5 V, and ±2.5 V true bipolarinput signals while sampling at throughput rates up to 1 MSPSper channel pair with 85 dB signal-to-noise ratio (SNR). HigherSNR performance can be achieved with the on-chip oversamplingmode (85.3 dB for an oversampling ratio (OSR) of 2).

　　The input clamp protection circuitry can tolerate voltages up to±21 V. The AD7617 has 1 MΩ analog input impedance, regardlessof sampling frequency. The single-supply operation, on-chipfiltering, and high input impedance eliminate the need fordriver op amps and external bipolar supplies.

　　The device contains analog input clamp protection, a dual, 14-bitcharge redistribution successive approximation register (SAR)analog-to-digital converter (ADC), a flexible digital filter, a2.5 V reference and reference buffer, and high speed serial andparallel interfaces. The AD7617 is serial peripheral interface(SPI)/QSPI™/DSP/MICROWIRE compatible.

　　AD7617主要特性:

　　16-channel, dual, simultaneously sampled inputs

　　Independently selectable channel input ranges

　　True bipolar: ±10 V, ±5 V, ±2.5 V

　　Single 5 V analog supply and 2.3 V to 3.6 V VDRIVE supply

　　Fully integrated data acquisition solution

　　Analog input clamp protection

　　Input buffer with 1 MΩ analog input impedance

　　First-order antialiasing analog filter

　　On-chip accurate reference and reference buffer

　　Dual 14-bit SAR ADC

　　Throughput rate: 2× 1 MSPS per channel pair

　　Oversampling capability with digital filter

　　Flexible sequencer with burst mode

　　Flexible parallel/serial interface

　　SPI/QSPI/MICROWIRE/DSP compatible

　　Optional CRC error checking

　　Hardware/software configuration

　　Performance

　　85.3 dB typical SNR at 500 kSPS (2× oversampling)

　　85 dB typical SNR at 1 MSPS

　　−103 dB typical THD at ±10 V range

　　±0.3 LSB INL (typical), ±0.99 LSB DNL (maximum)

　　8 kV ESD analog input pins only

　　On-chip self detect function

　　80-lead LQFP package

　　AD7617应用:

　　Power line monitoring

　　Protective relays

　　Multiphase motor control

　　Instrumentation and control systems

　　Data acquisition systems (DASs)

　　图1.AD7617功能框图

　　图2.AD7617外部连接图

　　评估板EVAL-AD7616SDZ/EVAL-AD7616-PSDZ

　　The EVAL-AD7616SDZ/EVAL-AD7616-PSDZ is a single, full featured evaluation board designed to easily evaluate all features of both the AD7616 and AD7616-P analog-to-digital converters (ADCs). The evaluation board can be controlled by the EVAL- SDP-CB1Z via the 120-way high speed system demonstration plat- form (SDP-B) connector (J10). The EVAL-SDP-CB1Z SDP-B board controls the evaluation board through a USB port of a PC using the evaluation board software, which is available for download from the AD7616 and AD7616-P product pages. Complete specifications for the AD7616 and AD7616-P devices are provided in the AD7616 and AD7616-P data sheets and should be consulted in conjunction with this user guide when using the evaluation boards. Full details on the EVAL-SDP-CB1Z are available on the SDP-B product page.

　　评估板EVAL-AD7616SDZ主要特性:

　　Full featured evaluation board for the AD7616 and AD7616-P

　　On-board power supplies

　　Standalone capability

　　SDP-B controller board-compatible

　　PC software for control and data analysis

　　评估板EVAL-AD7616SDZ包括:

　　EVAL-AD7616SDZ/EVAL-AD7616-PSDZ evaluation board

　　DC power supply

　　图3.评估板EVAL-AD7616SDZ/EVAL-AD7616-PSDZ(左)和EVAL-SDP-CB1Z板(右)连接图

　　图4.评估板EVAL-AD7616SDZ/EVAL-AD7616-PSDZ(左)和EVAL-SDP-CB1Z板(右)建立图