您现在的位置：首页 > 技术方案 >电源管理 > 基于RBN40H125S1FPQ-A0/R7S910035主控器件的20kW高频UPS解决方案

基于RBN40H125S1FPQ-A0/R7S910035主控器件的20kW高频UPS解决方案

来源： RENESAS

2018-03-13

类别：电源管理

374

拍明

UPS，即不间断电源，是将蓄电池(多为铅酸免维护蓄电池)与主机相连接，通过主机逆变器等模块电路将直流电转换成市电的系统设备。主要用于给单台计算机、计算机网络系统或其它电力电子设备如电磁阀、压力变送器等提供稳定、不间断的电力供应。当市电输入正常时，UPS 将市电稳压后供应给负载使用，此时的UPS就是一台交流式电稳压器，同时它还向机内电池充电;当市电中断(事故停电)时， UPS 立即将电池的直流电能，通过逆变器切换转换的方法向负载继续供应220V交流电，使负载维持正常工作并保护负载软、硬件不受损坏。UPS 设备通常对电压过高或电压过低都能提供保护。

UPS是针对中国电网环境和网络监控及网络系统、医疗系统等对电源的可靠性要求，克服中、大型计算机网络系统集中供电所造成的供电电网环境日益恶劣的问题，以全新的数字技术研制出的第三代工频纯在线式智能型UPS。直流电源，是维持电路中形成稳恒电流的装置。如干电池、蓄电池、直流发电机等。

UPS和直流电源是企业重要的供电保障设备，传统的维护管理包括：①日常巡检外观，定期更换电池、滤波电容、风机等易损件，大修时做电池活化等;②改造或采用换代设备，使用高级工具测试电池性能。这种管理方式企业投入成本高，维护人员工作量大，不易实时掌握设备运行状态和关键数据，设备事故预防能力低。实施在线维护管理可避免传统方式的不足之处，获得良好效益。

UPS的中文意思为“不间断电源”，是英语“Uninterruptible Power System/Uninterruptible Power Supply”的缩写，它可以保障计算机系统在停电之后继续工作一段时间以使用户能够紧急存盘，使用户不致因停电而影响工作或丢失数据。

　　概述

　　20kW的高频UPS设计是不带隔离变压器的产品,高频UPS在行业内多采用Digital Signal Processor(数字信号处理器)控制技术,实现高开关速率的IGBT和高速处理技术,实现高功率密度集成和小型化，提升产品性能和可靠性。

　　20kW高频UPS有成本上和体积上的压力。因此，RENESAS的G8H技术的IGBT最高可以做到1250V/75A，依旧采用的是TO-247的封装，电流规格相当于2个40A的管子且并联一致性更高。因封装体积小、电流规格大、并联一致性高， RENESAS的IGBT单管更适合设计成本低、功率密度高和体积小的20kW的高频UPS产品。

　　优势

　　• RENESAS公司G8H技术的IGBT，型号主要是RBN40H125S1FPQ-A0(1250V/40A, Cres为18PF)和RBN75H125S1FP4-A0(1250V/75A，Cres为30PF)。该类型的IGBT减小C极与G极间的反向传输电容Cres，降低振铃，提高并联一致性，增加了产品的稳定性和降低产品应用过程中的故障率。

【RBN40H125S1FPQ-A0】

1250V - 40A - IGBT Application: Uninterruptible Power Supply

Features

 Low collector to emitter saturation voltage

VCE(sat) = 1.8 V typ. (at IC = 40 A, VGE = 15 V, Ta = 25°C)

 Built in fast recovery diode in one package

 Trench gate and thin wafer technology (G8H series)

 High speed switching

 Short circuit withstands time (10 s min.)

Outline

Absolute Maximum Ratings

Note: Continuous heavy condition (e.g. high temperature/voltage/current or high variation of temperature) may affecta reliability even if it are within the absolute maximum ratings. Please consider derating condition for appropriatereliability in reference Renesas Semiconductor Reliability Handbook (Recommendation for Handling and Usage of Semiconductor Devices) and individual reliability data.

Notes:

1. PW  10 s, duty cycle  1%

2. Please use this device in the thermal conditions which the junction temperature does not exceed 175°C.Renesas IGBT Application Note is disclosed about reliability test and application condition up to 175°C.

3. Pulse test

4. Switching time test circuit and waveform are shown below.

5. Verified by design.

• RENESAS公司的32位带浮点运算单元的RZ/T1系列MCU，型号是 R7S910035。该MCU集成逆变控制IP和安全加密功能，高采样的速度和精度，控制逆变输出的交流电与旁路的交流电保持同相，降低谐波并保证UPS与负载安全

【RZ/T1】

Realize Real-Time Control of Industrial Equipment and Networking at the Same Time

The RZ/T1 Group has the Arm® Cortex®-R4 Processor with FPU core, which was designed for real-time processing, and is capable of high-speed operation at up to 600 MHz. Furthermore, access does not need to be performed via cache memory, and tightly-coupled memory capable of definitive real-time response processing is built-in, enabling high-speed access from the CPU without passing through the cache memory.

RZ/T1 devices that are equipped with a built-in R-IN engine, an accelerator for industrial Ethernet communications, can perform industrial Ethernet processing without loss of real-time performance by Hardware RTOS (HW-RTOS)

RZ/T1 devices that are equipped with a configurable absolute encoder interface are perfectly suited for precision motion control applications. The range of industry standards that are supported by the configurable encoder interface includes EnDat2.2, BiSS®-C, A-format™, Tamagawa and HIPERFACE® DSL.

Key Features : RZ/T1(with R-IN engine)

ITEM	RZ/T1(with R-IN engine)
Part NAME	R7S910015	R7S910016	R7S910017	R7S910018
Packages	320FPBGA
	0.8mm pitch
	17mm x 17mm
Main CPU	Arm^®Cortex^®-R4 Processor with FPU
Maximum operating frequency	450MHz		600MHz
FPU	Supports single-precision and double-precision addition, subtraction, multiplication, division, multiply-accumulation, and square root calculation
Tightly-coupled memory	ATCM: 512 KB (with ECC); BTCM: 32 KB (with ECC)
Cache memory	Instruction cache: 8 KB (with ECC); data cache: 8 KB (with ECC)
Communication accelerator	R-IN engine multi-protocol communication accelerator
Expanded internal SRAM	1 MB (with ECC) *also used for storing protocol stack
Clocks	External clock/resonator input frequency: 25 MHz
	CPU clock frequency: up to 450/600 MHz
	Low-speed on-chip oscillator (LOCO): 240 kHz
Timers	Up to 33 expanded timer functions
	16-bit TPUa (12 channels), MTU3a (9 channels), GPTa (4 channels): input capture, output compare, PWM waveform output
	16-bit CMT (6 channels), 32-bit CMTW (2 channels)
Communications	EtherMAC: 1 port (with switching)
	EtherCAT slave controller
	USB 2.0 high-speed host/function: 1 channel
	CAN (ISO 11898-1 compliant): up to 2 channels
	16-byte SCIFA with FIFO: 5 channels
	I²C bus interface: 2 channels of up to 400 kbps transfer speed
	RSPIa: 4 channels
	SPIBSC: 1 channel of multi-I/O serial flash memory connectable
Memory interfaces	SPI 4ch
	QSPI(Flash I/F) with Direct Access from CPU
	SRAM I/F(32bit bus)
	SDRAM I/F(32bit bus)
	Burst ROM I/F(32bit bus)
Encoder interfaces	-	A-format™, BiSS^®-C, EnDat2.2, HIPERFACE^®DSL, Tamagawa	-	A-format™, BiSS^®-C, EnDat2.2, HIPERFACE^®DSL, Tamagawa
A/D converter	12-bit A/D converter: 2 units (unit 0: 8 channels; unit 1: 16 channels)
DMA	16 channels x 2 units
Other functions	Built-in temperature sensor for measuring internal chip temperature
	Safety features (register write protection, input clock oscillation stop detection, CRC, IWDTa, A/D self-diagnostics, error control module, etc.)
	Security functions (option): Secure boot, JTAG lock, etc.
Power supply voltage	3.3 V (I/O), 1.2 V (internal)
Operating temperature range	Tj = -40℃ ～ +125℃