On Semi NCP1631交错式2相功率因数控制方案
原标题:On Semi NCP1631交错式2相功率因数控制方案
On Semi 公司的NCP1631是交错式2相功率因数控制器,具有接近1功率因数,2个小段相对1个大段,减小元件尺寸,改善散热;它的频率钳位临界导电模式(FCCrM)及频率反走技术线性降低钳位频率成为功率的函数,优化负载范围内的能效,180°相移输出大幅减小电流纹波,减少电磁干扰(EMI)及降低大电容均方根(rms)电流, 非常适合平板电视及超薄笔记本适配器.本文介绍NCP1631主要特性, 功能方框图, 电流检测方框图和零电流检测图, 振荡器方框图以及典型应用电路图.
NCP1631:Interleaved, 2-Phase Power Factor Controller
The NCP1631 is a controller for use in 2-phase interleaved power factor correction pre-converters. Interleaving consists of paralleling two small stages in lieu of a single big stage. This approach has several merits like ease of implementation, ability to use smaller components, and better distribution of heating. These attributes make the interleaved PFC topology attractive to slim form factor applications such as flat panel TVs and ultra-slim notebook adapters. Interleaving can also extend the power range of Critical Conduction Mode, which is an efficient and cost-effective (no need for low trr diodes) operating mode. The NCP1631 operates in frequency Clamped Critical Conduction mode (FcCrM). The circuit utilizes frequency foldback to linearly decay the clamping frequency as a function of power. As a result, the NCP1631 provides optimized efficiency across the load range. In addition, the NCP1631 drivers exhibit a 180 phase shift for a significantly reduced current ripple, which lowers EMI and reduces the rms current in the bulk capacitor. The NCP1631 incorporates all the features necessary for building robust and compact interleaved PFC stages, with a minimum of external components. Available in SOIC-16 package.
NCP1631主要特性:
Near−Unity Power Factor
Substantial 180 degree Phase Shift in All Conditions Including Transient Phases
Frequency Clamped Critical Conduction Mode (FCCrM) i.e.,Fixed Frequency, Discontinuous Conduction Mode Operation with Critical Conduction Achievable in Most Stressful Conditions
FCCrM Operation Optimizes the PFC Stage Efficiency Over the Load Range
Out−of−phase Control for Low EMI and a Reduced rms Current in the Bulk Capacitor
Frequency Fold−back at Low Power to Further Improve the Light Load Efficiency
Accurate Zero Current Detection by Auxiliary Winding for Valley Turn On
Fast Line / Load Transient Compensation
High Drive Capability: −500 mA / +800 mA
Signal to Indicate that the PFC is Ready for Operation (“pfcOK” Pin)
VCC Range: from 10 V to 20 V Safety Features
Output Over and Under Voltage Protection
Brown−Out Detection with a 50−ms Delay to Help Meet Hold−up Time Specifications
Soft−Start for Smooth Start−up Operation
Programmable Adjustment of the Maximum Power
Over Current Limitation
Detection of Inrush Currents
NCP1631典型应用:
Computer Power Supplies
LCD/Plasma Flat Panels
All Off Line Appliances Requiring Power Factor Correction
图1.NCP1631功能方框图
图2.NCP1631零电流检测图
图3.NCP1631电流检测方框图
图4.NCP1631振荡器方框图
图5.NCP1631低电压方框图
图6.NCP1631典型应用电路图
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。