0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >电源管理 > 基于UCC28740/UCC24610/FAN501/FAN6230的高效能电源管理适配器设计方案

基于UCC28740/UCC24610/FAN501/FAN6230的高效能电源管理适配器设计方案

来源:
2019-12-27
类别:电源管理
eye 408
文章创建人 拍明

原标题:高效能电源管理设计方案

  可穿戴设备正集成越来越多的功能,这为电源管理带来挑战。可穿戴设备中的电池通常非常小,设备又需要长时间工作而不用充电,因此功耗是一个关键的设计考虑因素。要保证可穿戴设备的时尚性,电路需要保持在极小的尺寸以内,这使电源管理等器件更倾向于采用单芯片解决方案。为应对电池技术难以解决续航时间的诉求,可穿戴设备有可能采用新型电源,例如对太阳能或热能进行能量采集。

  可穿戴设备电源的安全性也不可忽视,充电器需要考虑到各种保护措施。可穿戴设备电源还需要考虑充电精度、显示驱动以及平台兼容性等一系列的问题。另外,可穿戴设备市场目前还处于起步阶段,有许多可穿戴设备还是沿用已有的便携设备电源管理方案做开发。

  适配器要同时满足超低待机功耗与高能效,是鱼与熊掌难以兼得。目前正进入一场新改革,自行调整电源,可以实现电源的电压、电流随着用电设备的需求而调整,从而实现超低的待机功耗基础上,进行快速充电的目的。为应对这一革命性发展趋势,高能效,低功耗的电源解决方案是必要的。

  电源适配器方案框图:

  

电源适配器方案图

  电源适配器方案如下:

  一、 5V/5A 快速充电电源适配器方案(依主芯片厂牌字母排序)

  1.输出 5V/5A Fairchild FAN501 + FAN6230 25W电源适配器方案

  2.输出 5V/5A ON NCP1247 + NCP4303 25W 电源适配器方案

  3.输出 5V/5A TI UCC28740 + UCC24610 25W 电源适配器方案

  二、 65W ~ 120W 超低功耗电源适配器方案(依主芯片厂牌字母排序)

  1.输出 19V/3.42A 的 NXP TEA18362 + TEA1792 65W 电源适配器方案

  2.输出 19.5V/4.62A 的 NXP TEA1755 + TEA1792 90W电源适配器方案

  3.输出 19.5V/4.7A 的 ON NCP1937 + NCP4303 90W 电源适配器方案

  4.输出 19.5V/6.2A 的 ON NCP1937A 120 W电源适配器方案

  NCP1937: Combination Power Factor Correction & Quasi-Resonant Flyback Controller

  This combination IC integrates power factor correction (PFC) and quasi-resonant flyback functionality necessary to implement a compact and highly efficient Switched Mode Power Supply for an adapter application.

  The PFC stage exhibits near-unity power factor while operating in a Critical Conduction Mode (CrM) with a maximum frequency clamp. The circuit incorporates all the features necessary for building a robust and compact PFC stage while minimizing the number of external components.

  The quasi-resonant current-mode flyback stage features a proprietary valley-lockout circuitry, ensuring stable valley switching. This system works down to the 4th valley and toggles to a frequency foldback mode with a minimum frequency clamp beyond the 4th valley to eliminate audible noise. Skip mode operation allows excellent efficiency in light load conditions while consuming very low standby power consumption.

  特性

  • <10mW No Load Standby Performance

  • High Voltage Startup Circuit and Active Input Filter Capacitor Discharge Circuitry

  • High Voltage Line Voltage Detector

  • Integrated High Voltage Switch Disconnects PFC Feedback Resistor Divider

  • Fault Input for Severe Fault Conditions

  • Bi-Level Line-Dependent Output Voltage

  • Boost Diode Short-Circuit Protection

  • Adjustable PFC Disable Threshold Based on Output Power

  • Frequency Foldback with Minimum Frequency Clamp

  • Minimum Frequency Clamp

  • Valley Switching Operation with Valley-Lockout

  • PFC

  • QR Flyback Controller

  优势

  • Lowest no load performance

  • Eliminates the need for an external HV startup circuit and X2 resistors.

  • Optimize performance based on 110 v or 220 V ac mains

  • Reduces no load standby power

  • Enhanced protection capability

  • Optimized system with different input voltages

  • Enhanced protection features

  • Optimized system to improve efficiency

  • Enhanced efficiency at light and no load

  • Eliminates audible noise

  • Noise free operation

  应用

  • Adapters

  • Combo PFC+QR

  终端产品

  • All-In-One (AIO) Computers

  • High Power Notebook Adapters




责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯