ST STUSB4500 USB供电(PD)控制器解决方案
原标题:ST STUSB4500 USB供电(PD)控制器解决方案
ST公司的STUSB4500是单独可用的USB Type-C™供电(PD)控制器,能实现专用算法,允许不用MCU支持进行供电和电源的协调(自动运行模式),可以在两个USB Type-C端口间进行检测,容易在源和沉建立有效连接,能确定所接触器件是源还是调试附件,能解决电缆取向和双绞线连接到USB数据路由选择(MUX控制).主要用在机顶盒,硬盘驱动,摄像机和照相机,物联网(IoT),无人机,电池供电的设备,LED照明,以及健康和手持设备.本文介绍了STUSB4500主要特性,功能框图,应用电路图以及评估板STEVAL- ISC005V1主要特性,功能框图,电路图,材料清单和PCB设计图.
The STUSB4500 is a USB power delivery controller that addresses sink devices. It implements a proprietary algorithm to allow the negotiation of a power delivery contract with a source without MCU support (auto-run mode). PDO profiles are configured in an integrated non-volatile memory.
The device supports dead battery mode and is suited for sink devices powered from dead battery state and requiring high power charging profile to be fully operational.
Thanks to its 20 V technology, it implements high voltage features to protect the CC pins against short-circuits to VBUS up to 22 V and to support high voltage on the VBUS pins directly connected to the VBUS power path up to 28 V.
The STUSB4500 is a USB Type-C™ and power delivery controller IC for sink applications. It is able to negotiate apower delivery contract with a source without MCU support (auto-run mode). It relies on proprietary algorithmsand configurable PDO (power data objects) thanks to an integrated non-volatile memory. It supports dead batterymode to allow a system to be powered from an external source directly. Combined with its capability to negotiatedirectly a power contract, the STUSB4500 is the ideal controller device for autonomous systems requiring highpower charging profile to be fully operational.
The STUSB4500 major role is to:
1. Detect the connection between two USB Type-C ports (attach detection)
2. Establish a valid source-to-sink connection
3. Determine the attached device mode: source or debug accessory
4. Resolve cable orientation and twist connections to establish USB data routing (MUX control)
5. Negotiate a USB power delivery (PD) contract with a PD capable source device
6. Configure the incoming VBUS power path and the charging paths accordingly
7. Monitor the VBUS power path and manage the VBUS voltage transitions
8. Handle the high voltage protections
The STUSB4500 also provides:
• Dead battery mode
• PDO (power data object) customization through NVM
• Internal and/or external VBUS discharge paths
• Dual high power charging path support
• Debug accessory mode detection
• Customization of the device configuration through NVM to support specific applications
STUSB4500主要特性:
Auto-run Type-C™ and USB PD sink controller
Dead battery mode support
Up to 3 sink PDO configurable profiles
Dual high power charging path support
Integrated VBUS switch gate drivers (PMOS)
Integrated VBUS voltage monitoring
Internal and/or external VBUS discharge paths
Short-to-VBUS protections on CC pins (22 V)
High voltage capability on VBUS pins (28 V)
Dual power supply (VSYS and/or VDD ):
VSYS = [3.0 V; 5.5 V]
VDD = [4.1 V; 22 V]
Debug accessory mode support
Temperature range: -40 ℃ up to 105℃
ESD: 3 kV HBM - 1.5 kV CDM
Certified:
USB Type-C™ rev 1.2
USB PD rev 2.0 (TID #1000133)
Interoperable with USB PD rev 3.0
STUSB4500应用:
• Set-top-box, hard disk drives, camcorders, cameras
• IoT, drones, accessories and battery powered devices
• LED lighting and industrial
• Healthcare and handheld devices
• Any Type-C sink device
图1.STUSB4500功能框图
评估板STEVAL-ISC005V1
The STEVAL-ISC005V1 evaluation board is a ready-to-use USB PD sink based on STUSB4500. It handles the USB PD negotiation with a source to enable one or more charging paths.
An L7985 device ensures step-down conversion from the negotiated VBUS sink input to output a 5 V regulated supply which optionally allows powering an MCU evaluation board or any other system.
Several LEDs report power availability on each of the 4 available outputs.
The USB PD sink port is pre-configured with three different PDOs to address a broad range of applications (5 V, 15 V and 20 V).
PDOs can be easily customized thanks to a graphical user interface (GUI).
评估板STEVAL-ISC005V1主要特性:
USB PD port (sink)
STUSB4500 USB Power Delivery controller, certified for:
USB type-C™ (rev1.2)
USB PD (rev2.0)
TID: 1000133
Compliant with USB PD (rev3.0)
5 V on-board DC-DC
VBUS power switches and discharge path
Support to up to 3 power data objects (PDO)
Short-to-VBUS protections on CC pins (22 V) and VBUS pins (28 V)
Customizable start-up profiles
Multiple output paths
Compatible with NUCLEO-F072RB development board for configuration and debug interface
CE certified
RoHS and China RoHS compliant
图3.评估板STEVAL-ISC005V1外形图
图4.评估板STEVAL-ISC005V1功能框图
图5.评估板STEVAL-ISC005V1和NUCLEO-F072RB开发板连接图
图6.评估板STEVAL-ISC005V1电路图(1):STUSB4500
图7.评估板STEVAL-ISC005V1电路图(2):LED
图8.评估板STEVAL-ISC005V1电路图(3):+5V产生
图9.评估板STEVAL-ISC005V1电路图(4):用来I2C接入的USB-Nucleo接口
评估板STEVAL-ISC005V1材料清单:
图10.评估板STEVAL-ISC005V1 PCB设计图(1):尺寸
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。