AnalogicTech AAT3698-1/AAT3698-2 1.6A线性锂电池充电方案
原标题:AnalogicTech AAT3698-1(2)1.6A线性锂电池充电方案
AnalogicTech公司的 AAT3698-1/AAT3698-2 BatteryManager™是单节锂离子/锂聚合物电池线性充电器,输入电源为USB端口,或输入电压高达7.0V的AC适配器。为安全起见,AAT3698- 1/-2还包括高达28V的过压保护。LDO输出5V/50mA,可编程快速充电电流从50mA到1.6A,主要用在蓝牙手机,耳机及配件,数码相机,手机,PDA,MP3播放器等。本文介绍了AAT3698-1/-2主要特性,功能方框图,典型应用电路以及AAT3698-1/-2评估板电路图和评估板材料清单(BOM)。
1.6A Linear Li-Ion Battery Charger in 3x3 TDFN
The AAT3698-1/-2 BatteryManager™ is a single-cell lithium-ion (Li-Ion)/Li-Polymer battery charger IC designed to operate from a USB port or AC adapter with an input voltage of up to 7.0V. For increased safety, the AAT3698- 1/-2 also includes over-voltage input protection (OVP) up to 28V.
The AAT3698-1/-2 precisely regulates battery voltage for 4.2V Li-Ion/Polymer battery cells through a low RDS(ON) switch. The charging current can be set by an external resistor up to 1.6A. If an over-voltage condition occurs from the input, the series switch quickly opens and a fault flag is activated, preventing damage to the battery and the charging circuitry.
Other fault conditions are monitored in real time. In case of an over-current, battery over-voltage, short circuit, or over-temperature failure, the device will automatically shut down, thus protecting the charging device, control system, and the battery under charge. A status monitoring output pin (STAT) is provided to indicate charging activity. This open drain output pin can be used to drive an external LED as a charging indicator.
The AAT3698-1/-2 also includes a 5.0V LDO linear regulator with over-voltage protection that can supply loads of up to 50mA.
The AAT3698-1/-2 is available in the Pb-free, thermally enhanced, space-saving 3x3mm TDFN33-14 package and is rated over the -40℃ to +85℃ temperature range.
AAT3698-1/-2主要特性:
• USB or AC Adapter System Power Charger
• 3.0V ~ 7.0V Input Voltage Range
• Fast Over-Voltage Protection Turn Off
• OVP Trip Threshold: 7.25V (typ)
• High Level of Integration with Internal:
▪ Power Device
▪ Reverse Current Blocking
▪ Current Sensing
• 5V/50mA LDO Output
• Programmable Fast Charge Current from 50mA to 1.6A
• Programmable Charge Termination Current
• Charge Status Indicator
• Power OK Indicator
• Battery Absence Detection Input Pin
• Automatic Termination and Recharge Sequencing (AAT3698-1 Only)
• Automatic Trickle Charge For Battery Pre-Conditioning
• Emergency Thermal Shutdown Protection
• Digitally Controlled Thermal Loop Regulation
• Active Low Enable with Internal 200kΩ Pull-Down Resistor
• Output for Auto-Booting
• 14-pin 3x3mm TDFN Package
AAT3698-1/-2应用:
• Bluetooth™ Headsets, Headphones, Accessories
• Digital Still Cameras
• Mobile Telephones
• Personal Data Assistants (PDAs)
• MP3 Players
• Other Lithium-Ion/Polymer Battery-Powered Devices
图1。AAT3698-1/-2功能方框图
图2。AAT3698-1/-2典型应用电路图
图3。AAT3698-1/-2评估板电路图
AAT3698-1/-2评估板材料清单(BOM):
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。