Avago AEAT-6600-T16 16位可编程角度磁编码解决方案
原标题:Avago AEAT-6600-T16 16位可编程角度磁编码解决方案
Avago公司的 AEAT-6600是10- 16位可编程无接触磁旋转编码器,工作电压5V或3.3V,绝对值输出3线或2线SSI接口模式,绝对值10位到16位分辨率,增量输出分辨率8-1024CPR,主要用无刷DC马达的3相转子,替代电子分解器和电位计,工业自动化和机器人。本文介绍了AEAT-6600主要特性和指标,方框图以及OTP编程模式和对准模式电路图,AEAT-6600-T16磁编码器编程器套件主要特性:
AEAT-6600-T16:10 to16-Bit Programmable Angular Magnetic Encoder IC
The Avago AEAT-6600 angular magnetic encoder IC is a contact less magnetic rotary encoder for accurate angular measurement over a full turn of 360 degrees. It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device.
To measure the angle, only a simple two-pole magnet, rotating over the center of the chip, is required. The magnet may be placed above or below the IC.
The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 0.005° = 65 536 positions per revolution. This digital data is available as a serial bit stream and as a PWM signal.An internal voltage regulator allows the AEAT-6600 to operate at either 3.3 V or 5 V supplies.
AEAT-6600主要特性:
5 V or 3.3 V operation
3-wire or 2-wire SSI interface mode for absolute output
Incremental ABI or UVW, and PWM output modes
User-programmable zero position, direction & index pulse width
Easy magnet alignment with magnetic field strength output and alignment mode
Power-down mode to reduce current consumption
TSSOP-16 IC package
RoHS compliant
AEAT-6600指标:
Absolute 10-bits to 16-bits resolution
Incremental output resolutions 8 to 1024 CPR
-40℃ to 125℃ operating temperature range
AEAT-6600应用:
3-phase commutation for brushless DC motor
Resolver and potentiometer replacement
Industrial automation and robotics
图1。AEAT-6600方框图
AEAT-6600-T16磁编码器编程器套件
This user manual describes the Avago HEDS-8937 programmer kit. The AEAT-6600-T16 magnetic encoder programming kit features real-time monitoring and programming of the 32-bit OTP memory within the AEAT-6600-T16 magnetic encoder IC. The HEDS-8937 kit includes the IC interface hardware that is supported by PC software. The IC interface hardware is a microcontroller system that links the AEAT-6600-T16 encoder to the PC through a USB cable. This user manual describes the hardware and PC software setup and gives instructions on PC software operation.
AEAT-6600-T16磁编码器编程器套件主要特性:
Bus-powered USB device
On-board 6.5 V programming voltage
Auto-power off when the AEAT-6600-T16 is removed from the programming socket
Read and write the 32-bit OTP memory
Real-time monitoring of SSI, PWM, ABI or UVW outputs
Real-time monitoring of MAG_HI and MAG_LOW Signals
套件包括:
1. USB cable
2. AEAT-6600-T16 magnetic encoder programmer
3. IC adapter socket
4. 16-pin ribbon cable
5. Installation CD
图。AEAT-6600-T16磁编码器编程器套件外形图
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。