ST M24SR64-Y动态NFC-RFID标签解决方案
原标题: ST M24SR64-Y动态NFC-RFID标签解决方案
ST公司的M24SR64-Y是具有双接口的动态NFC-RFID标签IC,嵌入EEPROM存储器,RF 协议和ISO/IEC 14443 Type A 与NFC Forum Type 4标签兼容,能与13.56 MHz RFID阅读器或NFC手机工作.本文介绍了M24SR64-Y主要特性,框图以及评估板M24SR-DISCOVERY主要特性,框图,电路图,材料清单和PCB元件布局图.
The M24SR64-Y device is a dynamic NFC/RFID tag IC with a dual interface. It embeds an EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz RFID reader or an NFC phone.
The I2C interface uses a two-wire serial interface, consisting of a bidirectional data line and a clock line. It behaves as a slave in the I2C protocol.
The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag.
M24SR64-Y主要特性:
I2C interface
• Two-wire I2C serial interface supports 1 MHz protocol
• Single supply voltage: 2.7 V to 5.5 V
Contactless interface
• NFC Forum Type 4 Tag
• ISO/IEC 14443 Type A
• 106 Kbps data rate
• Internal tuning capacitance: 25 pF
Memory
• 8-Kbyte (64-kbit) EEPROM
• Support of NDEF data structure
• Data retention: 200 years
• Endurance: 1 million erase-write cycles
• Read up to 246 bytes in a single command
• Write up to 246 bytes in a single command
• 7 bytes unique identifier (UID)
• 128 bits passwords protection
图1. M24SR64-Y框图
评估板M24SR-DISCOVERY
The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the M24SR series and is based on the M24SR64 device. Two versions of this kit are available: the Standard Edition and the Premium Edition.
The Premium Edition includes all of the Standard edition features, plus a headset and a Bluetooth module to demonstrate the convenience to pair it with a smartphone via NFC.
The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbits EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz RFID reader or an NFC phone.
The I2C interface uses a two-wire serial interface, consisting of a bidirectional data line and a clock line. It behaves as a slave with respect to the I2C protocol.
The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag.
The board is powered through the USB bus. It also includes a microcontroller STM32F103 to drive the EEPROM via I2C and the LCD screen via SPI bus.
评估板M24SR-DISCOVERY主要特性:
• Ready-to-use printed circuit board (PCB) including:
– M24SR64-Y Dynamic NFC/RFID tag
– 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
– STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
– LCD Color Screen (320*200 pixels)
– Different color LEDs
– USB microB connector for board powering
– JTAG connector for microcontroller firmware upgrade and debug
– Joystick for menu selection
• M24SR-DISCO-PREM specific features:
– Bluetooth module with audio outputs connected to Jack 3.5
– Headset
图2. 评估板M24SR-DISCOVERY框图
图3. 评估板M24SR-DISCOVERY外形图
评估板M24SR-DISCOVERY材料清单(BOM):
图7. 评估板M24SR-DISCOVERY PCB元件布局图:正面
图8. 评估板M24SR-DISCOVERY PCB元件布局图:背面
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。