基于PowerInt公司的InnoSwitch-CH USB 10W充电器参考设计
原标题:PowerInt InnoSwitch-CH USB 10W充电器参考设计
PowerInt公司的InnoSwitch-CH系列产品具有高度集成和紧凑封装,EcoSmart能效,先进保护和安全特性,无负载的功耗小于10mW,大大简化低压大电流电源的开发和制造,主要用于智能手机充电器.本文介绍了InnoSwitch-CH系列产品亮点,框图,典型应用电路,以及RDR-420 - 10 W CV/CC USB充电器主要指标,电路图,材料清单和PCB元件布局图.
The InnoSwitch™-CH family of ICs dramatically simplifies the development and manufacturing of low-voltage, high current power supplies, particularly those in compact enclosures or with high efficiency requirements. The InnoSwitch-CH architecture is revolutionary in that the devices incorporate both primary and secondary controllers, with sense elements and a safety-rated feedback mechanism into a single IC.
Close component proximity and innovative use of the integrated communication link permit accurate control of a secondary-side synchronous rectification MOSFET and optimization of primary-side switching to maintain high efficiency across the entire load range. Additionally, the minimal DC bias requirements of the link, enables the system to achieve less than 10 mW no-load in challenging applications such as smart-mobile device chargers.
InnoSwitch-CH系列产品亮点:
Highly Integrated, Compact Footprint
Incorporates flyback controller, 650 V MOSFET, secondary-side sensing and synchronous rectification
Integrated, HIPOT-isolated, feedback link
Exceptional CV/CC accuracy, independent of transformer design or external components
Instantaneous transient response ±5% CV with 0%-100%-0% load step
EcoSmart™– Energy Efficient
<10 mW no-load at 230 VAC
Easily meets all global energy efficiency regulations
Low heat dissipation
Advanced Protection / Safety Features
Primary sensed output OVP
Secondary sensed output overshoot clamp
Secondary sensed output OCP to zero output voltage
Hysteretic thermal shutdown
Full Safety and Regulatory Compliance
100% production HIPOT compliance testing at 6 kV DC/1 sec
Reinforced insulation
Isolation voltage >3,500 VAC
UL1577 and TUV (EN60950) safety approved
EN61000-4-8 (100 A/m) and EN61000-4-9 (1000 A/m) compliant
Green Package
Halogen free and RoHS compliant
InnoSwitch-CH系列应用:
Chargers and adapters for smart mobile devices
High efficiency, low voltage, high current power supplies
图1. InnoSwitch-CH系列初级边控制器框图
图 InnoSwitch-CH系列5V/2A通用输入充电器电路图
RDR-420 - 10 W CV/CC USB充电器
RDR-420 - 10 W CV/CC USB充电器指标:
图. RDR-420 - 10 W CV/CC USB充电器外形图(顶层)
图. RDR-420 - 10 W CV/CC USB充电器外形图(底层)
图6. RDR-420 - 10 W CV/CC USB充电器电路图
图7. RDR-420 - 10 W CV/CC USB充电器变压器电路图
RDR-420 - 10 W CV/CC USB充电器材料清单(B)M):
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。