原标题：Infineon HybridPACK 2混合动力汽车电源模块解决方案

　　infineon公司的HybridPACK 2是设计用于混合动力和电动汽车的汽车级电源模块,连续功率高达100kW,工作结温150°C,采用Trench-Field-Stop IGBT3三相六组配置,芯片的最大额度是800A/650V,主要用于混合动力和电动汽车的马达和/或电机逆变器,和汽车电子应用.

　　本文介绍了HybridPACK™ 2主要特性, 应用框图, HybridPACK™ 2混合模块驱动板主要特性,框图,电路图,材料清单和模块器件装配图以及HybridPACK™ 2混合模块逻辑板v1.2和v1.3b主要特性,框图,电路图,材料清单和模块器件装配图.

　　Infineon’ HybridPACK™ 2 is an automotive qualified power module designed for Hybrid- and Electric Vehicle applications from a power range up to 100kW continuous power. Designed for a 150°C junction operation temperature, the module accommodates a 3-phase Six-Pack configuration of Trench-Field-Stop IGBT3 and matching emitter controlled diodes. Maximum chip ratings are 800A/650V.

　　The HybridPACK™ 2 power module is based on Infineon’s leading IGBT Trench- Field-Stop Technology, which offers lowest conduction and switching losses.

　　The HybridPACK™ 2 power module is built on Infineon’s long time experience in the development of IGBT power modules, intense research efforts of new material combinations and assembly technologies.

　　Based on the usage of modern power semiconductor chips, Infineon has developed -dedicated for xEV - this HybridPACK™ 2 power module as a part of the HybridPACK™ family for automotive applications.

　　The HybridPACK™ 2 comes with a Pin-Fin baseplate for direct liquid cooling which significantly improves the thermal cycles capability and extends the lifetime of the power module. The Pin-Fin baseplate with its excellent cooling properties enables a very high power density of the HybridPACK™ 2 package.

　　The high-performance ceramic substrate (DCB) and Infineon’s enhanced wire-bonding process provides unparalleled thermal and power cycling capability leading to highest reliability for xEV inverter applications. For a compact design the driver stage PCB can be connected on the top of the module.All power connections are realized with screw terminals.

　　The HybridKIT 2 Evaluation Kit offers a complete inverter reference system with driverand control-board, heatsink, DC-Link capacitor and software enabling a fast application design.

　　All modules from the HybridPACK™ family are dedicated for automotive applications with highest power density and efficiency. Built in accordance with Infineon’s automotive excellence program, this fully automotive qualified HybridPACK™ 2 sets the quality and reliability standards for power modules in hybrid and electric vehicles.

　　HybridPACK™ 2主要特性:

　　„„Complete 3-phase six pack with NTC

　　„„650V Trench-Field-Stop IGBT3 with matching emitter controlled diode

　　„„Extended temperature range

　　–– Tjop = 150℃

　　–– Tjmax = 175℃

　　„„Current rating up to 800A DC

　　„„Rugged Al2O3 ceramic for automotive applications

　　„„Pin-Fin baseplate for direct cooling

　　„„Fully automotive qualified Benefits

　　„„Cost efficient system approach

　　„„High efficiency due to low power losses

　　„„High reliability

　　„„Compact design

　　„„HybridKIT 2 reference design available

　　„„Very high power density

　　HybridPACK™ 2应用:

　　„„Motor and/or generator inverter for Hybrid- and Electric Vehicles and Range Extenders

　　(up to 100kW continuous)

　　„„Rugged ceramic substrate for automotive applications

　　图1. HybridPACK™ 2应用框图

　　The Hybrid Kit for HybridPACK™2 was developed to support customers during their first steps in designing applications with HybridPACK™2 IGBT module.

　　图2. HybridPACK™ 2混合模块外形图

　　The Hybrid Kit for HybridPACK™2 is made up of two PCBs (Driver Board and Logic Board) mechanically and electrically suitable to be used with an IGBT Module HybridPACK™2 (included), a DC-bus capacitor and a cooler.All these components build a complete main inverter for (H)EV applications up to 80kW.

　　HybridPACK™ 2混合模块主要特性:

　　• Complete main inverter for (H)EV applications up to 80kW

　　• Automotive qualified IGBT module HybridPACK™2

　　– 650V/800A IGBT & Diode chipset

　　• Automotive qualified Driver IC 1ED020I12-FA

　　– Based on coreless transformer technology

　　– Up to 1200V and 2A driving capability

　　– VCE sat - detection

　　• TriCore™ family 32-bit microcontroller TC1767: member of the AUDO FUTURE product family designed for automotive applications

　　• Possibility of usage of different motor position interfaces: encoder, resolver, GMR (Giant Magneto-Resistance) or hall sensor

　　HybridPACK™ 2混合模块驱动板主要特性:

　　• Six channel IGBT driver

　　• Electrically and mechanically suitable for 650 V IGBT Module HybridPACK™2

　　• Includes DC/DC power supply

　　• Isolated voltage measurement

　　• Short circuit protection with toff < 6 μs

　　• Undervoltage lockout of IGBT driver IC

　　• Positive logic with 5 V CMOS level for PWM and Fault signals

　　• One fault output signal for each leg and one common for all legs

　　图4. HybridPACK™ 2混合模块驱动板外形图:安装在HybridPACK™ 2模块上.

　　HybridPACK™ 2混合模块驱动板材料清单:

　　图20. HybridPACK™ 2混合模块逻辑板v1.2外形图

　　图21. HybridPACK™ 2混合模块逻辑板v1.3b外形图

　　图22. HybridPACK™ 2混合模块逻辑板框图

　　HybridPACK™ 2混合模块逻辑板v1.2材料清单:

　　HybridPACK™ 2混合模块逻辑板v1.3b材料清单: