基于Semtech SX1276+SX1301的LoRa智慧消防解决方案
原标题:联合唯传科技推出基于Semtech SX1276+SX1301的LoRa智慧消防解决方案
业务背景: 消防是城市运转的重要组成部分,对保证城市消防安全和人员疏散有着重大意义。据公安部统计的数据显示,造成火灾巨大经济损失和人员伤亡70%以上的原因是消防设施管理不善造成的。建立科学、智慧的消防管理系统已成为当下智慧城市建设的热点。
解决方案
唯传智慧消防解决方案利用物联网基础网络,融合大数据、云计算、移动互联网等现代信息技术,将各种消防设施进行联网监测并将监测到的数据实时传至云平台和业务管理平台。业务管理平台对收集的数据进行监测、统计、分析和信息共享,做到事前预警,事中处理,全面提升市政、社区消防管理水平和效率。
系统组成
系统优势
统一监控:将消防设施状态在平台集中监控
统一管理:设备管理、数据管理、报警流程管理
统一维护:终端自动预警和报警,提醒工作人员进行维护
数据对接:提供标准API接口,便捷对接第三方应用平台
应用价值
1. 构建消防安全
2. 手机APP消防安全随时掌握
3. 提升消防管理水平
4. 应用免布线部署,简单快捷,降低施工成本
关于唯传
唯传科技是一家专注于低功耗物联网(LPWAN)技术研究与运营的服务商,为企业客户提供运营级低功耗的网络建设、设备连接、数据传输与平台服务。产品覆盖感知层、网络层与应用云平台,为实现物联网真正互联互通的目标,我们提供全面技术方案与支持,帮助企业客户建立全新的商业模式,实现合作共赢。
唯传科技的产品包含基站网关、Kitlink云平台、LoRaWAN通讯模组及终端传感器等多系列产品,涉及智慧城市、智慧交通、智慧能源、智慧农业、智慧畜牧、智慧消防、智慧环保、资产监管、物联网金融等多领域,可满足各行各业大规模的物联网部署,解决应用中的覆盖、容量、功耗、施工等难点问题,使客户对IOT数据的获取变的更加简单,实现物联网低成本管理与运营。
联系我们
在物联网项目部署上,唯传科技能提供全面技术方案与支持,解决应用中的覆盖、功耗、施工等难点问题,实现物联网低成本管理与运营。
产品实体图
展示板照片
方案方块图
核心技术优势
△ 基于标准LoRaWAN™协议
△ 采用光电烟雾传感器检测
△ 报警方式采用指示灯、声音、无线远程报警
△ 独特的三色指示灯指示报警器的各种状态
△ 报警音量大于80dB (正前方3m处)
△ 内置9V锂电池供电,持续工作时间可长达3年
△ 支持低电压、故障数据上报
△ 吸顶式安装
方案规格
△ LoRa通信速率:292bps~5.4kbps
△ 工作频段:CN470EU868MHZAU915 MHZ US915 MHZAS923MHZ
△ 最大发射功率:19dbm
△ 最大接收灵敏度:-141dBm(SF=12)
△ 报警方式:指示灯、声音、无线远程报警
△ 报警音量:>80dB (正前方3m处)
△ 指示灯:三色灯(绿色为正常,红色为火警,黄色为故障)
△ 保护面枳:≥ 40 m2
△ 报警执行标准:GB20517-2006
△ 工作温度:-10℃~50℃
△ 工作湿度:10%~95%
△ 供电方式:电池供电
△ 电池容量:1200mAh
△ 电池寿命:3年
△ 休眠状态:≤6uA
△ 接收电流:≤16mA
△ 发送电流:≤125mA
△ 尺寸:106mm*106mm*46mm
【Semtech SX1276】
137MHz to 1020MHz Long Range Low Power Transceiver
The SX1276/77/78/79 transceivers feature the LoRa® long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
Using Semtech’s patented LoRa modulation technique SX1276/77/78/79 can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRa also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.
Features
LoRa Modem
168dB maximum link budget
+20dBm - 100 mW constant RF output vs. V supply
+14dBm high efficiency PA
Programmable bit rate up to 300kbps
High sensitivity: down to -148dBm
Bullet-proof front end: IIP3 = -11dBm
Excellent blocking immunity
Low RX current of 9.9mA, 200nA register retention
Fully integrated synthesizer with a resolution of 61Hz
FSK, GFSK, MSK, GMSK, LoRa and OOK modulation
Built-in bit synchronizer for clock recovery
Preamble detection
127dB Dynamic Range RSSI
Automatic RF Sense and CAD with ultra-fast AFC
Packet engine up to 256 bytes with CRC
Built-in temperature sensor and low battery indicator
Applications
Automated Meter Reading
Home and Building Automation
Wireless Alarm and Security Systems
Industrial Monitoring and Control
Long range Irrigation Systems
Packaging
QFN 28
Order Codes
SX1276IMLTRT - Pb-free, Halogen free, RoHS/WEEE compliant product
【Semtech SX1301】
Digital Baseband Chip for outdoor LoRaWAN™ macro gateways
The SX1301 digital baseband chip is a massive digital signal processing engine specifically designed to offer breakthrough gateway capabilities in the ISM bands worldwide. It integrates the LoRa concentrator IP.
Features
Up to -142.5dBm sensitivity with SX1257 Tx/Rx front-end (see reference design)
70 dB CW interferer rejection at 1 MHz offset
Able to operate with negative SNR, CCR up to 9dB
Emulates 49x LoRa demodulators and 1x (G)FSK demodulator
Dual digital TX&RX radio front-end interfaces
10 programmable parallel demodulation paths
Dynamic data-rate (DDR) adaptation
True antenna diversity or simultaneous dual-band operation
Applications
Smart Metering
Security Sensors Network
Agricultural Monitoring
Internet of Things (IoT)
Order Codes
SX1301IMLTRC
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。