原标题：ST STGIPS20C60 1300W马达驱动方案

　　ST公司的STGIPS20C60是小型低损耗智能功率模块(IPM),三相20A 600V IGBT桥,包括用于栅极驱动的控制IC和续流二极管(FWD),主要用在三相马达驱动和空调机.本文介绍了STGIPS20C60主要特性,框图和典型应用电路,以及STEVAL-IHM034V2 1300W马达控制板主要特性,电路图和材料清单.

　　SLLIMM™ small low-loss intelligent molded moduleIPM, 3-phase inverter - 20 A, 600 V short-circuit rugged IGBT. This intelligent power module provides acompact, high performance AC motor drive in asimple, rugged design. Combining ST proprietarycontrol ICs with the most advanced short-circuitruggedIGBT system technology, this device is ideal for 3-phase inverters in applications such asmotor drives and air conditioners. SLLIMM™ is atrademark of STMicroelectronics

　　STGIPS20C60主要特性:

　　IPM 20 A, 600 V 3-phase IGBT inverter bridgeincluding control ICs for gate driving and freewheelingdiodes

　　Short-circuit rugged IGBTs

　　3.3 V, 5 V, 15 V CMOS/TTL inputscomparators with hysteresis and pull down /pull up resistors

　　Undervoltage lockout

　　Internal bootstrap diode

　　Interlocking function

　　Smart shutdown function

　　Comparator for fault protection against overtemperature and overcurrent

　　DBC leading to low thermal resistance

　　Isolation rating of 2500 Vrms/min

　　UL recognized: UL1557 file E81734

　　STGIPS20C60应用:

　　3-phase inverters for motor drives

　　Air conditioners

　　图1.STGIPS20C60框图

　　图2. STGIPS20C60应用电路图

　　STEVAL-IHM034V2马达控制板

　　The STEVAL-IHM034V2 is a complete motor control kit solution for the evaluation of STMicroelectronics® wide product portfolio tailored to applications where it is necessary to drive, simultaneously, two motors in sensorless field oriented control (FOC) and perform active power factor correction (PFC) through digital control of a single-stage boost DC-DC converter.

　　Typical applications include in-room air conditioners (RACs), where this ST solution can drive the compressor, outdoor fans and PFCs. The microcontroller unit consists of STMicroelectronics’ ARM™ Cortex-M3 core-based STM32F103RC, which is capable of carrying out all of the previously-mentioned tasks simultaneously. The board is compatible with the STM32F2 series and with the ARM™ Cortex-M4 core-based STM32F4 series.

　　Motor 1 is powered by the onboard SLLIMM™ (small low-loss intelligent molded module) STGIPS20C60. Motor 2 can be powered by an external STMicroelectronics power stage, such as those that can be evaluated using the STEVAL-IHM021V1, STEVAL-IHM024V1, STEVAL-IHM032V1 or STEVAL-IHM035V1 evaluation boards. Simultaneously, the same microcontroller unit drives the onboard boost PFC stage designed with the STGW35HF60W ultrafast IGBT or, alternatively, for high switching frequencies the STW38N65M5 MDmesh V Power MOSFET, and STTH15R06D Turbo2 ultrafast diode or the STPSC1206D Schottky silicon carbide diode.

　　The STEVAL-IHM034V2 can be used together with the STM32 permanent magnet synchronous motor (PMSM) single/dual FOC software development kit (SDK) v3.2 or later and its compatible PFC v1.0 firmware plug-in.

　　STEVAL-IHM034V2马达控制板主要特性:

　　Nominal power 1300 W, max.power 1700 W

　　Digital PFC section:

　　Single-stage boost converter based on the STGW35HF60W(or STW38N65M5)and STTH15R06D or (STPSC1206D)

　　AC mains current sensing

　　DC bus voltage sensing

　　Hardware overcurrent protection

　　Hardware overvoltage protection

　　AC mains voltage zero crossing detection

　　Rectified AC mains voltage sensing

　　External boost inductor

　　Inverter section (motor 1 drive):

　　IGBT intelligent power module STGIPS20C60 in SDIP 25L molded package

　　3-shunt or DC link motor current sensing

　　Hardware overcurrent protection

　　Heatsink temperature measurement

　　Overcurrent protection disabling network

　　Control section:

　　Centralized dual motor control and PFC drive, using the STM32F103RCT6

　　MC connector to drive the second motor power stage (a compatible power board, such as the STEVAL-IHM021V1, STEVAL-IHM024V1, or STEVAL-IHM032V1, can be plugged here)

　　SWD programming and debugging

　　JTAG programming

　　Opto-isolated USART communication

　　Other functions:

　　User key, reset, potentiometer, user LED, NTC relay, test points

　　Power supply:

　　+15 V, +3.3 V power supply

　　RoHS compliant

　　图3.STEVAL-IHM034V2马达控制板外形图

　　STEVAL-IHM034V2马达控制板系统特性:

　　 Nominal power: 1300 W, max. power 1700 W

　　 Digital PFC section:

　　– Single-stage boost converter

　　– STGW35HF60WD ultrafast IGBT in TO-247 package; it may be replaced with an

　　STGW35HF60W if a free-wheeling diode (like the STTH2L06) is soldered onbetween its collector and emitter

　　– Turbo2 ultrafast diode STTH15R06D in TO-220AC package

　　– AC mains current sensing (shunt resistor and amplification, using rail-to-railinput/output 8 MHz TSV914)

　　– DC bus voltage sensing

　　– Hardware overcurrent protection

　　– Hardware overvoltage protection

　　– AC mains voltage zero crossing detection

　　– Rectified AC mains voltage sensing

　　– External boost inductor

　　 Inverter section (motor 1 drive):

　　– IGBT intelligent power module STGIPS20C60 in SDIP 25L molded package

　　– 3-shunt or DC link motor current sensing (shunt resistor and amplification, usingrail-to-rail input/output 8 MHz TSV914)

　　– Hardware overcurrent protection

　　– Heatsink temperature measurement

　　– Overcurrent protection disabling network

　　 Control section:

　　– Centralized dual motor control and PFC drive, using STM32F103RCT6

　　– MC connector to drive the second motor power stage (a compatible power board,such as STEVAL-IHM021V2, STEVAL-IHM024V1, or STEVAL-IHM032V1,can beplugged here)

　　– SWD programming and debugging

　　– JTAG programming (DC +5 V supply only)

　　– USART communication using ST3232C, insulated with optocouplers;

　　– Other functions: user key, reset, potentiometer, user LED, NTC relay, test points

　　 Power supply:

　　– +15 V, +3.3 V power supply based on VIPER16, L78L33AC, LD1117S33TR.

　　STEVAL-IHM034V2马达控制板目标应用:

　　Air conditioning motor drive (compressor, outdoor fan) and PFC

　　STEVAL-IHM034V2马达控制板材料清单: