0 卖盘信息
您现在的位置: 首页 > 商城快讯 > 热门方案> 电源管理 > ADI ADP5065兼容USB功率电能快速电池充电管理方案

ADI ADP5065兼容USB功率电能快速电池充电管理方案

来源: 中电网
2019-05-10
类别:电源管理
eye 39
文章创建人 拍明芯城

原标题:ADI ADP5065兼容USB功率电能快速电池充电管理方案

  ADI公司的ADP5065是一款内嵌互联直流电压充电输出端与电池端的FET器件,通过FET可以实现电池隔离,当系统驱动电能来自于废电池或没有电池时,系统会立即切换到USB供电模式。ADP5065的输入电压范围为4V至5.5V,最大输入电压高达20V。ADP5065充电器兼容USB2.0、USB3.0和USB电池充电规范1.1。本文通过总结ADP5065器件的特点,分别介绍器件、特性、应用方向及内部结构框图,并给参考设计实例原理图、制板图及元器件清单。

  The ADP5065 charger is fully compliant with the USB 2.0, USB 3.0, and USB Battery Charging Specification 1.1 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

  The ADP5065 operates from a 4 V to 5.5 V input voltage range but is tolerant of voltages of up to 20 V. This alleviates the concerns about the USB bus spiking during disconnect or connect scenarios.

  The ADP5065 also features an internal FET between the dc-to-dc charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connection to a USB power supply.

  Based on the type of USB source, which is detected by an external USB detection chip, the ADP5065 can be set to apply the correct current limit for optimal charging and USB compliance.

  The ADP5065 comes in a very small and low profile 20-lead WLCSP (0.5 mm pitch spacing) package.

  ADP5065主要特性:

  3 MHz switch mode charger

  1.25 A charge current from dedicated charger

  Up to 680 mA charging current from 500 mA USB host

  Operating input voltage from 4.0 V up to 5.5 V

  Tolerant input voltage −0.5 V to +20 V (USB VBUS)

  Dead battery isolation FET between battery and charger output

  Battery thermistor input with automatic charger shutdown for when battery temperature exceeds limits

  Compliant with the JEITA Li-Ion battery charging temperature specification

  SYS_EN_OK flag to hold off system turn-on until battery is at minimum required level for guaranteed

  system startup due to minimum battery voltage and/or minimum battery charge level requirements

  EOC programming with C/20, C/10 and specific current level selection

  ADP5065应用:

  Digital still cameras

  Digital video cameras

  Single cell Li-Ion portable equipment

  PDA, audio, GPS devices

  Mobile phones

  图1. ADP5065方框图

  ADP5065设计原理图:

  图2. ADP5065设计原理图

  ADP5065设计方案材料清单:

  PCB元件布局图:


责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing(at)iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing(at)iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: ADI 电池

相关资讯