0 卖盘信息
您现在的位置: 首页 > 商城快讯 > 热门方案> 工业控制 > 基于TI公司的LMZ21701 17V1A降压电源模块解决方案

基于TI公司的LMZ21701 17V1A降压电源模块解决方案

来源: 中电网
2019-03-15
类别:工业控制
eye 35
文章创建人 拍明芯城

原标题:TI LMZ21701 17V1A降压电源模块解决方案

  TI公司的LMZ21701是容易使用的SIMPLE SWITCHER® Nano模块,小型3.5 mm × 3.5mm× 1.75 mm封装,驱动电流高达1A,输入电压3V-17V,输出电压0.9V-6V,效率高达95%,主要用在照相机监测IP网络,工业监视器,软件定义无线电电(SDR),DLP光谱,示波器和TV等.本文介绍了LMZ21701主要特性和功能框图, 评估模块LMZ21701 EVM主要特性,电路 材料清单和PCB设计文件.

  The LMZ21701 SIMPLE SWITCHER® Nano Module is an easy-to-use step-down DC-DC solution capable of driving up to 1000 mA load in space-constrained applications. Only an input capacitor, an output capacitor, a softstart capacitor, and two resistors are required for basic operation. The Nano Module comes in 8-pin DFN footprint package with an integrated inductor. The LMZ21701 architecture is based on DCS-Control™ (Direct Control with Seamless Transition into Power Save Mode). This architecture combines the fast transient response and stability of hysteretic type converters along with the accurate DC output regulation of voltage mode and current mode regulators.

  The LMZ21701 architecture uses Pulse Width Modulation (PWM) mode for medium and heavy load requirements and Power Save Mode (PSM) at light loads for high efficiency. In PWM mode the switching frequency is controlled over the input voltage range. The value depends on the output voltage setting and is typically reduced at low output voltages to achieve higher efficiency. In PSM the switching frequency decreases linearly with the load current. Since the architecture of the device supports both operation modes (PWM and PSM) in a single circuit building block, the transition between the modes of operation is seamless with minimal effect on the output voltage.

  LMZ21701主要特性:

  Integrated Inductor

  Miniature 3.5 mm × 3.5 mm × 1.75 mm Package

  35 mm2 Solution Size (Single Sided)

  –40 °C to 125 °C Junction Temperature Range

  Adjustable Output Voltage

  Integrated Compensation

  Adjustable Soft Start Function

  Starts into Pre-Biased Loads

  Power Good and Enable Pins

  Seamless Transition to Power-Save Mode

  Up to 1000 mA Output Current

  Input Voltage Range 3 V to 17 V

  Output Voltage Range 0.9 V to 6 V

  Efficiency up to 95 %

  1.5 µA Shutdown Current

  17 µA Quiescent Current

  LMZ21701应用:

  Camera Surveillance IP Network

  Industrial Monitor

  Software Defined Radio (SDR)

  DLP Spectroscopy

  Oscilloscope

  TV: LCD/Digital

  图1. LMZ21701功能框图

  评估模块LMZ21701 EVM

  The LMZ21701 SIMPLE SWITCHER® nano module is an easy-to-use DC-DC solutions optimized for space constrained applications. The LMZ21701 EVM is capable of delivering up to 1A load with excellent power conversion efficiency, output voltage accuracy, line and load regulation and load transient response. The evaluation board is configured for 3.3V output voltage from 5V to 17V input. The resistor voltage divider RFBT and RFBB set the output voltage. The external capacitor CSS sets the softstart time for VOUT. See the datasheet for component selection and device details. The board features turret terminals for easy connection to input supply, load, EN input, as well as softstart voltage and power good flag monitoring.

  评估模块LMZ21701 EVM主要特性:

  Board Specifications

  • VIN = 5V to 17V

  • VOUT = 3.3V

  • 1A max load (LMZ21701)

  • 650mA max load (LMZ21700)

  • 4 layer PCB

  • 4.2 x 4.2 cm PCB size

  图2. 评估模块LMZ21701 EVM外形图

  图3. 评估模块LMZ21701 EVM电路图

  评估模块LMZ21701 EVM材料清单:VIN = 5 V to 17 V, VOUT = 3.3 V, IOUT (MAX) = 1000 mA (LMZ21701), 650 mA (LMZ21700)

  评估模块LMZ21701 EVM材料清单: VIN = 5 V to 17 V, VOUT = 3.3 V, IOUT (MAX) = 1000 mA (LMZ21701), 650 mA (LMZ21700)

  图5. 评估模块LMZ21701 EVM材料清单PCB设计文件


责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing(at)iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing(at)iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: TI 电源模块

相关资讯